to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.

Here is the stand where eventually the whole setup will reside.

Click on the photo to start tagging. Done Tagging

In This Album

The stand. 4x4 structural members. Birch sides, pine trim. The back of the tank and fans into the hood. Here is the stand where eventually the whole setup will reside. You can see some of the wiring and the two pendants and vents here. IMG 2597 IMG 2606 IMG 2626 IMG 2629 check this out. If you make a stand like this, beware! The 4x4 where the built in overflow goes will need to be chiseled out to allow the drain/return lines to come out of the tank! So this 90 gallon does not have a center-brace up top or on the bottom. The glass is 1/2" thick on the front and back, so it does not bow out even though these braces arent there. This makes the tank more open looking from the top, but also makes it weigh the wet/dry!!! a 90 gallon tank with a built in refugium fed by the skimmer, a Reeflo Goby Gold pump, a fluval 405 in the cabinet for mechanical filtration, a UV sterilizer that is going to feed the fuge as well. I am hoping that the pump is strong e IMG 2598 IMG 2607 IMG 2627 IMG 2632 the hood with its air inlet/outlets. Maybe it needs one more in the middle...
NeverlosT
Sep 6, 2009
XenGallery by sonnb