to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.

the hood with its air inlet/outlets. Maybe it needs one more in the middle...

Click on the photo to start tagging. Done Tagging

In This Album

check this out. If you make a stand like this, beware! The 4x4 where the built in overflow goes will need to be chiseled out to allow the drain/return lines to come out of the tank! So this 90 gallon does not have a center-brace up top or on the bottom. The glass is 1/2" thick on the front and back, so it does not bow out even though these braces arent there. This makes the tank more open looking from the top, but also makes it weigh the wet/dry!!! a 90 gallon tank with a built in refugium fed by the skimmer, a Reeflo Goby Gold pump, a fluval 405 in the cabinet for mechanical filtration, a UV sterilizer that is going to feed the fuge as well. I am hoping that the pump is strong e IMG 2598 IMG 2607 IMG 2627 IMG 2632 the hood with its air inlet/outlets. Maybe it needs one more in the middle... The setup with doors open. Tank from the side with no sand. Very free-flowing structure, pieces epoxied together to allow plenty of swim space and good spots to put corals. IMG 2599 IMG 2608 IMG 2634 the hood all stained. A set of lights I got for CHEAP. Two working 175W metal halides! Bonus! Now the hood design is being altered to include a vertical extension to house the halides. I need to choose a reflector system still. This housing has already been dissasembled and t The aquascaping from the front (the hood is off obviously). I will be filling it with water this week I hope!
NeverlosT
Aug 26, 2009
XenGallery by sonnb