Search Results

to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.

Search Again
Page 1 of 10
  1. ZachB
    Post

    2" Bulkhead Flow

    Very little. I have a 2" bulkhead for the close loop intake on my tank and the flow is incredible. As I was filling the tank and turned on the pump...
    Post by: ZachB, Apr 11, 2009 in forum: Filters, Pumps, etc..
  2. ZachB
    Post

    Bullet 1 issues

    I will double check the red hoses. Repetitive is OK. I don't want to be doing something dumb. These things are pretty simple when you break them...
    Post by: ZachB, Apr 11, 2009 in forum: Protein Skimmers
  3. ZachB
    Post

    Bullet 1 issues

    [IMG] [IMG] Very watery skimmate, but does smell. The bubbles in the skimmer are a bit large. It started with the water level down about 1 inch...
    Post by: ZachB, Apr 11, 2009 in forum: Protein Skimmers
  4. ZachB
    Post

    Bullet 1 issues

    It is definitely capped. Good call. This is one of the first things I thought of when I saw this problem. I thought the cap had fallen off. The...
    Post by: ZachB, Apr 11, 2009 in forum: Protein Skimmers
  5. ZachB
    Post

    Bullet 1 issues

    Alright - there has to be an air leak somewhere. When I turned the air almost completely off, the skimmer started to foam. It's now wet skimming...
    Post by: ZachB, Apr 11, 2009 in forum: Protein Skimmers
  6. ZachB
    Post

    Bullet 1 issues

    Well, suddenly all the foam went away and it's just "boiling" inside the riser. Air valve once again does nothing. I'm just going to leave this...
    Post by: ZachB, Apr 11, 2009 in forum: Protein Skimmers
  7. ZachB
    Post

    Bullet 1 issues

    Holy balls. When these things skim, they skim, don't they. Wow. somehow it started working. Not sure how. Now I just have to find a way to keep...
    Post by: ZachB, Apr 11, 2009 in forum: Protein Skimmers
  8. ZachB
    Post

    Bullet 1 issues

    It's been torn down, is as clean as can be. Was missing an o ring which is now replaced. It requires a large pump. Mag 12 is right on par with...
    Post by: ZachB, Apr 11, 2009 in forum: Protein Skimmers
  9. ZachB
    Post

    Bullet 1 issues

    Thanks, unfortunately it's the weekend and they're closed. Thought I may be able to find a bit of assistance here and maybe get it running before...
    Post by: ZachB, Apr 11, 2009 in forum: Protein Skimmers
  10. ZachB
    Post

    Bullet 1 issues

    Any bullet 1 owners have suggestions? When the air valve is off, the water is foamy and bubbly. When the air valve is on, the water is foamy and...
    Post by: ZachB, Apr 11, 2009 in forum: Protein Skimmers
  11. ZachB
    Post

    Bullet 1 issues

    I got a new o-ring. I can't figure this out. The air valve does nothing.
    Post by: ZachB, Apr 11, 2009 in forum: Protein Skimmers
  12. ZachB
    Post

    Bullet 1 issues

    I think I'm going to head down to tractor supply / home depot tomorrow and see if I can find an o-ring that would fit. Most likely that's the...
    Post by: ZachB, Apr 10, 2009 in forum: Protein Skimmers
  13. ZachB
    Post

    Bullet 1 issues

    There's nothing there. You know, I think that may be the problem. Good eye dude! When you give it a half twist it's still kind of loose after it...
    Post by: ZachB, Apr 10, 2009 in forum: Protein Skimmers
  14. ZachB
    Post

    Bullet 1 issues

    [IMG] [IMG] It seems to leak around the top of the elbow / hose barb base. [IMG] All seals seem intact.
    Post by: ZachB, Apr 10, 2009 in forum: Protein Skimmers
  15. ZachB
    Post

    Bullet 1 issues

    I think it will be an easy fix - how do you replace the elbow (hose barb) piece that feeds into the bullet injector. I can't get the one that's in...
    Post by: ZachB, Apr 10, 2009 in forum: Protein Skimmers
  16. ZachB
    Post

    Bullet 1 issues

    I think it's a slip - at least the one they sent me as a spare was in the plumbing kit. I tried to replace the barb, and it will not come off. The...
    Post by: ZachB, Apr 10, 2009 in forum: Protein Skimmers
  17. ZachB
    Thread

    Bullet 1 issues

    So I'm hooking up my Bullet 1 tonight and I'm running into some issues. I'm using a Mag 12 for the pump. Well, first issue with that is I couldn't...
    Thread by: ZachB, Apr 10, 2009, 51 replies, in forum: Protein Skimmers
  18. ZachB
    Post

    Reeflo pumps looking for testers

    I have a ReeFlo Dart and love it. I simply hear the whir of the fan and that's all. Excellent pumps.
    Post by: ZachB, Apr 10, 2009 in forum: General Reef Topics
  19. ZachB
    Post

    Zach's 75G Build

    lol. Dueling banjos ::) It is a beast - I had heard from most folks on here that they skim very well, so I picked it up. Once you see it in...
    Post by: ZachB, Apr 9, 2009 in forum: Show Off Your Fish Tanks!
  20. ZachB
    Post

    Zach's 75G Build

    Bullet 1 My Bullet 1 arrived today! Mag 12 and waste container arriving tomorrow. Huge kudos to 3reef member Powerman for the sale. If he ever...
    Post by: ZachB, Apr 9, 2009 in forum: Show Off Your Fish Tanks!
Showing results 1 to 20 of 193 Next >
Search Again
Page 1 of 10