Join 3reef now to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.
I have a can that has been open for about 9 months now and it's not in the freezer. Is it all clumped up or still a fine powder?
I run 2 Hammerheads in mine but one just runs a closed loop to a ocean motion valve and the other one runs a 6 1" valve manifold for sump return,...
Welcome to 3reef, glad to have you aboard. Do a search on filtration and you will find a bunch of stuff to read.
Me or KOgle will let you know when the next one is if you want to come. Then after your tank is up we can meet down there. :)
You also need to decide what corals your going to keep. You will want a big enough pump that you can run a manifold to tie in maybe a calcium...
I have had my Quad Core for a while and love it too J. You will like the speed when you start multitasking.
Welcome to 3reef. If you use a chisel you can just about break the rock where you want...sometimes.
Yep looks like a frutie symbol. ;)
Shouldn't be a big cycle at all, probably won't even notice it.
You better hurry up with the pics before we call Luna and have you arrested for violating 3reef laws. :) Add a fan to the top of tank or your sump...
You should be ok with the 10k until the new bulbs get there. Blowing out the ballast is good maintenance because they can get hot.
Bet crutches are a normal decor in your house. :P
A heater is a must with a SW tank. You should never rely on the house temp to keep the tank stable. Get a Titanium heater and if you never need it...
How long has the tank been running that your putting this rock in? Plus what size tank is it?
I run a sps dominate tank so I burn my actinincs 16 hrs a day then turn on the MH's for 7 hrs in the middle. I always burn my actinics with my...
Just make sure there is no salt creep on the light socket and never leave oily finger prints on the bulbs. Always wash the bulbs off with rubbing...
Mine is always shaking her head and rolling her eyes when I bring up the tank. Impulse buying will get you in a lot of trouble and it is hard to...
In my program it keeps the O3 generator off for at least 15 min after it reaches the set value of ORP. I done this just to keep it from bouncing on...
Now you are starting to sound weird. :-[
That is the internal programming in the ACIII. The abbreviation in the first part of the program is what I put in so you would know what the relay...
Separate names with a comma.