Loc-Line help

Hey guys never used this stuff and currently my return pipe is just a bunch of 90* bends to get from the hose over the lip of the tank and then in. I want to be able to angle it, in 2 directions. So i guess the question is what piece do i use to connect the loc-line to the pvc? Or do i jsut scrap the pvc and connect the loc-line to the flex tubing i have running up from the return pump?

I know i will need a Y piece and then 2 pieces of loc-line and then 2 of the end nozzles. but what connects all this to the pvc or flex tubing? and how does it connect?

I think there is a piece that threads into a female end of pvc. So if i have a 1' line running up, and i want it to split to 2 should i use a 1/2" Y pieces of loc-line? If it splits 1" down too two 1/2" tubes this should not restrict flow correct? And then should i just use the 1 1/4" flare nose for 1/2 loc-line?

 

ah looking on bulkreefsupply and i cant find a 1" input to 1/2" output.

 

Here is what i used to have coming up and over my internal overflow box.




It is 1" PVC into a slip x thread 90 degree elbow with a 1"x3/4" threaded bushing screwed to the Loc Line adapter, wye and two sections of Loc Line.

 

oh very nice! thanks for the pics makes it so much easier lol, think ill do the same. need to get some new pieces.