Seano's 29G Reef

I thought about two ways of doing it.

1) Put a 1 1/4" coupling and an end cap on the open end. Then a barb fitting so I can connect the flex tubing to that (which will go to the sump).

2) OR put a T in my return line, using the return pump for the reactor. Connect the return line to the reactor (thus making it, an "in-line" reactor), separated by a ball valve to adjust flow to it. Then the other end will have the flex tubing going back to the sump.

 

I measured it and the siphon "chamber" (aka reactor) can hold a max of 300ml, probably more like 250ml with room for movement. But that's still plenty. I am going to run about 175ml.

 

Ack. I forgot to get Microbactor 7 before we placed the order on Amazon...dangit.

 

Page 78 of this issue of Coral magazine begins an interesting article about bio-polymers and solid carbon-source dosing medias. Ends on page 86.

http://edition.pagesuite-profession...aspx?eid=01987090-d3b9-40ca-9c62-559b8278318f

 

Seano - Great article. Thanks for posting.

 

Glad I could help!

Will you have one of these attached to every pendant on a separate line?

 

That's the plan.

 

Thats cool. You could have the 40* higher up than the 60*s to compensate for spread and equalize PAR.

 

Early February I should be getting...

halimeda macro
blue ochtodes macro
blue and/or gold anthelia
possibly some ricordea mushrooms

 

Sweet!