Join 3reef now to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.
I have a few more pieces with coral attached that I'll be adding, I also scored the pvc to help algae attach itself faster, eventually they will...
Thanks, I have pictures of the rock work in the build thead....
Just ordered my clean up crew from John at Reefcleaners.
I re-did all the rock work, so I only added a few pieces during the cycle and I only plan on adding a few more small pieces with coral established on...
I only have three, two clown and a yellow watchman goby, and they all get along. Of course my peppermint shrimp and goby hang out together so I...
My 90 gallon tank upgrade has been cycling for exactly three weeks on Saturday. After an initial ammonia spike, my ammonia and nitrite levels have...
And I love its happening in my sump.
Been through a cycle just not one with a sump or fuge.
My tank has been cycling for 2 1/2 weeks. Ammonia dropped back to 0, Nitrite at 0.25 and nitrates are at 10. I have a refugium with a piece of...
I would like to get a Coral Beauty and Flame Angel for my 90 gallon upgrade. I know it can be difficult and that the best chance for success is to...
My 90 gallon upgrade has been cycling for a week, had an ammonia spike after a few days and now today the nitrite level jumped. I am upgrading from a...
It ended up being a siphon hole underneath a 90 right where the nozzle connected, I plugged the hole.
Just to update, the tank is now full. I spent a few days playing with the sump, drain and return lines, siphon breaks, filter socks, micro bubbles...
So I plugged the whole on the return and have the nozzle set to where they will not overflow the sump. I also had a siphon holes on each side of the...
So its better to have the piping at the right height to avoid an overflow, instead of using a siphon break to prevent an overflow.
Unless I can figure out how to increase the return flow
I plugged the hole, and will probably just keep the nozzles just blow the water level.
Seems like I need to upgrade the pump to the mag 12, I already have a ball valve in place if I need to dial it down.
The bulkhead is 1" and the return pipe is also 1" up to the 90 on top of the return that has the siphon hole on the underside blowing air bubbles.
These are the best pics I have [IMG] [IMG]
Separate names with a comma.