Search Results

to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.

Search Again
Page 7 of 10
  1. Powerman
    Post

    55 gallon sump build

    micro bubble stay suspended and do not readily pop to the surface. My water falls from my fuge maybe 5", no bubbles. But even if, they are not micros...
    Post by: Powerman, Feb 26, 2010 in forum: I made this!
  2. Powerman
    Post

    55 gallon sump build

    Look at what your return pump does with the head pressure you will have. The GPH should be lower unless that number you gave is wi that. I had a Mag...
    Post by: Powerman, Feb 26, 2010 in forum: I made this!
  3. Powerman
    Post

    300 gallon FOWLR Skimmer

    So what is it you want to do Jack? Where are you going to put the skimmer? W?D filters are not terrible, but you already have a ton of live rock. You...
    Post by: Powerman, Feb 26, 2010 in forum: Protein Skimmers
  4. Powerman
    Post

    Are reef octopus and SWC skimmers made by the same company?

    I'll have to disagree with that. ATB uses a more slender cone than most other companies. The most obvious of the knock offs is I-Tech. (even though...
    Post by: Powerman, Feb 26, 2010 in forum: Protein Skimmers
  5. Powerman
    Post

    Are reef octopus and SWC skimmers made by the same company?

    Welcome, it isn't Canadian, the company is though. You can get Octopus online or anywhere really I suppose. Stores carry them. SWC too. SWC is Salt...
    Post by: Powerman, Feb 26, 2010 in forum: Protein Skimmers
  6. Powerman
    Post

    Mikejrice 30g *Finished*

    Wow, Mike. Nice. The coral grower down here always gets really intensely colored ones and large colonies. Not cheap. But I have thought about getting...
    Post by: Powerman, Feb 25, 2010 in forum: Show Off Your Fish Tanks!
  7. Powerman
    Post

    55 gallon sump build

    So here is the thing.... if a skimmer is putting out micro bubbles, it is usually mixed in the water and under the surface. Getting the bubbles to...
    Post by: Powerman, Feb 25, 2010 in forum: I made this!
  8. Powerman
    Post

    55 gallon sump build

    It would really depend on the skimmer. On a 90g say, with common skimmers, there is little info on water flows. But mine does around say 350gph. Well...
    Post by: Powerman, Feb 25, 2010 in forum: I made this!
  9. Powerman
    Post

    55 gallon sump build

    Ya, there is no flow control with an inline setup. You make a good point with removing the brace and adding the baffles. I'm no expert or anything...
    Post by: Powerman, Feb 25, 2010 in forum: I made this!
  10. Powerman
    Post

    Sump

    So the skimmer section depth will be set to 12 inches and you have 3 inches left over.The return section is good and will allow plenty of room for...
    Post by: Powerman, Feb 25, 2010 in forum: General Reef Topics
  11. Powerman
    Post

    My 210 gal reef tank

    Very nice.
    Post by: Powerman, Feb 25, 2010 in forum: Show Off Your Fish Tanks!
  12. Powerman
    Post

    Looking for a decent HOB Skimmer.

    The best out right now are by Warner Marine. H1 is rated to 50, H2 is rated to 90g. Jon has an ad for a H1 demo for $180. Great skimmer, great price,...
    Post by: Powerman, Feb 25, 2010 in forum: Protein Skimmers
  13. Powerman
    Post

    can you over protien skim???

    I asked the same question on RC a little while ago. While I got some "answers", there were no explainations or reasoning behind it. I do belive, as...
    Post by: Powerman, Feb 24, 2010 in forum: Protein Skimmers
  14. Powerman
    Post

    Zach's 110 gallon

    Woo Hoo!!! new build.
    Post by: Powerman, Feb 24, 2010 in forum: Show Off Your Fish Tanks!
  15. Powerman
    Post

    can you over protien skim???

    I'm still curious why you feel you need three skimmers on a 130g tank with one of them rated to 150g?
    Post by: Powerman, Feb 24, 2010 in forum: Protein Skimmers
  16. Powerman
    Post

    can you over protien skim???

    What is the 150 and 250 rated for, and why do you need both on a 130g? They may pull out a lot, but do they both produce 100% of the time?
    Post by: Powerman, Feb 24, 2010 in forum: Protein Skimmers
  17. Powerman
    Post

    can you over protien skim???

    So then if a skimmer removes too much food, then how will over feeding, or just turning of the skimmer for a feed period not fix that? While it is...
    Post by: Powerman, Feb 24, 2010 in forum: Protein Skimmers
  18. Powerman
    Post

    General Skimmer Questions

    We are 120v 60 hz. So if you are the same, I would think a plug would be a simple fix. The only problem is waiting a month for the boat to get there.
    Post by: Powerman, Feb 23, 2010 in forum: Protein Skimmers
  19. Powerman
    Post

    Mistakes I made as a Newbie

    Awesome post Inwall.
    Post by: Powerman, Feb 23, 2010 in forum: New To The Hobby
  20. Powerman
    Post

    New Cone Skimmers Will Ship Monday

    Perhaps Thursday or Friday?;)
    Post by: Powerman, Feb 23, 2010 in forum: SWC Skimmers.com
Showing results 121 to 140 of 198 Next >
Search Again
Page 7 of 10