Join 3reef now to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.
ive had many inquiries regarding the build on this tank, so to keep you posted this is whats going on. there is no guide to skimmer size based...
forcing air into a skimmer will produce more scfh which is a good thing as long as you dont ckoke out the pump
Reef Specialty
hy5000 are better
red dragon pumps are nothing more than a laguna with a loop back cooling port. does anyone know where to drill the hole on the laguna?
takes water from the skimmer back to the skimmer, produces more contact time. i wouldnt go any other way.
the science behind air/water mixture is common either in mesh or needle. i did two ideas, minimized the intake to create a better venturi suction and...
ive been messin with a mesh mod pump and heres whats goin on. the pump has a venturi with an air line and its a rocket 0-6" under water but lower...
exactly my point for this thread. which leads us back my original question
ive been running comparisons on different manufacturers and it seems the industry bases the loads like this: units in air intake / total system...
going from 27.3 to 26.8 in less than a minute is good. not having enough flow will freeze the chiller, to much flow wont allow the chiller to work....
thats an acro, consider yourself lucky to get it as an extra. check your parameters, they need perfect water quality.
if you didnt clean the bad to make it sterile then you jeopardized the livestock
he starved to death
the loss of fresh water
if its not a crab bought, its probably bad, google saltwater good/bad crabs to find out.
actually its 5-10 depending on the livestock housed ( coral, fish only )
psk's need to be submerged, other than that have you checked the scfh?
to much water not enough bubbles
your better off to find the source of the problem, research, then fix it.
Separate names with a comma.