Search Results

to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.

Search Again
Page 3 of 10
  1. Rapid LED
    Post

    Questions About Rapid LED kit

    Typically a 12V adapter is used, if you have an old cell phone charger lying around you can probably use that as well (I've tried it with a 10V...
    Post by: Rapid LED, Nov 12, 2012 in forum: RapidLED
  2. Rapid LED
    Post

    Questions About Rapid LED kit

    The SVR2 only needs to be adjusted if you are running colors other than RB/White. Royal blue and white (cool, neutral and white) can all handle...
    Post by: Rapid LED, Nov 11, 2012 in forum: RapidLED
  3. Rapid LED
    Post

    Bulbs keep burning out

    Very strange.. can you send some pics? As close as possible while still being clear, we'd like to see some of the LED/solder connections
    Post by: Rapid LED, Oct 5, 2012 in forum: RapidLED
  4. Rapid LED
    Post

    Bulbs keep burning out

    Are you running fans on the heatsinks? If not you're likely getting too much heat from the LEDs and they aren't being cooled properly. You should...
    Post by: Rapid LED, Oct 2, 2012 in forum: RapidLED
  5. Rapid LED
    Post

    power of drivers

    The only large driver we have is the HLG-185-42B, that has a max of 4.4A but usually you'll run multiple parallel (and identical) strings of 1-12...
    Post by: Rapid LED, Oct 1, 2012 in forum: RapidLED
  6. Rapid LED
    Post

    Coupons?

    Email us at staff@rapidled.com and I'll see what we can do, usually we can't do that but I'll see if we can make an exception.
    Post by: Rapid LED, Sep 18, 2012 in forum: RapidLED
  7. Rapid LED
    Post

    Coupons?

    Sorry but we aren't currently running any other special offers.
    Post by: Rapid LED, Sep 18, 2012 in forum: RapidLED
  8. Rapid LED
    Post

    Which controller is most compatible with your LED's

    To be honest I haven't used either over a tank, we've played with the Reef Angel for our lights in general but haven't used either unit for all the...
    Post by: Rapid LED, Sep 17, 2012 in forum: RapidLED
  9. Rapid LED
    Post

    Which controller is most compatible with your LED's

    Ahh okay. I'd take a look at the Reef Angel, it's a pretty nice unit as well.
    Post by: Rapid LED, Sep 17, 2012 in forum: RapidLED
  10. Rapid LED
    Post

    Which controller is most compatible with your LED's

    Yup, sorry but you'll need the Reef Angel (PWM), Boost Typhon or our DDC-01 controller.
    Post by: Rapid LED, Sep 17, 2012 in forum: RapidLED
  11. Rapid LED
    Post

    UV and Red stunner strip?

    I agree, the reds are overpowering and adding that much is going to overpower everything. In your second set-up it looks like you have 6 red/6 cyan...
    Post by: Rapid LED, Sep 15, 2012 in forum: RapidLED
  12. Rapid LED
    Post

    Grease? or Pads? RapidLEDs..

    If it's drilled/tapped go with grease, the pads are an alternative to thermal adhesive. The pads aren't meant to be as permanent as the adhesive,...
    Post by: Rapid LED, Sep 14, 2012 in forum: LED Aquarium Lighting
  13. Rapid LED
    Post

    Big Mistake

    Some simple green or alcohol should get the grease off safely, you can then re-apply thermal adhesive when the LEDs are dry. A DIY ATO isn't too...
    Post by: Rapid LED, Sep 5, 2012 in forum: RapidLED
  14. Rapid LED
    Post

    LED's for refugium?

    660nm is used for plants and refugiums because it helps trigger chlorophyll A (helps with photosynthesis), people use them for algae scrubbers quite...
    Post by: Rapid LED, Sep 5, 2012 in forum: RapidLED
  15. Rapid LED
    Post

    Big Mistake

    Are you using thermal grease or adhesive? The grease will never dry (grease is typically used with screws that hold the LED down), while the...
    Post by: Rapid LED, Sep 4, 2012 in forum: RapidLED
  16. Rapid LED
    Post

    Big Mistake

    I don't think it's too important to use the same gauge wire, as long as the distances are short both 18 or 20g would work.
    Post by: Rapid LED, Aug 27, 2012 in forum: RapidLED
  17. Rapid LED
    Post

    What color LEDs should I order?

    Most people that are supplementing their royal blue/cool white are going with a combination of UV/cyan/green/red. Keep in mind the cyan/green are...
    Post by: Rapid LED, Aug 27, 2012 in forum: RapidLED
  18. Rapid LED
    Post

    rapid led color combo and driver questions

    Either ratio will work, it depends on what color temperature you like in part as well as how much of a "full spectrum" you want. I have a BC29 and...
    Post by: Rapid LED, Aug 27, 2012 in forum: RapidLED
  19. Rapid LED
    Post

    Big Mistake

    Were you trying to solder the batteries together? You can probably also just use some electrical tape to ensure the connection is made. In any...
    Post by: Rapid LED, Aug 23, 2012 in forum: RapidLED
  20. Rapid LED
    Post

    Big Mistake

    My guess is you shorted out those LEDs, possibly more. If you can wire up two AA batteries in series with leads coming off both ends, then you can...
    Post by: Rapid LED, Aug 20, 2012 in forum: RapidLED
Showing results 41 to 60 of 189 Next >
Search Again
Page 3 of 10