Join 3reef now to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.
Set up a reactor for the carbon it will do a much better job at oder removal and requires less carbon and lees need to change it as often . I have...
So after all the goggling you have learned that Ph means nothing other then there is a problem with acids build up and if you have the systems...
First off yes remove the Lids and take some of that water put it in a cup and pump in some fresh air with a pump ad air stone and watch the Ph meter...
You know that is a problem I never worried about most of what you hear about the worms is simply reading repeaters with a goggle tool bar I have...
Yes but its a matter of simply removing the pressure of the excess bio sludge from under the plate, When i build them I always drill and install a...
Its not a deep sand bed at 4 " its a mess but you actually did take a baster and go around the bed at so many Sq. inches at a time and blast the sand...
This subject always ends up in a huge war.. (: But I started with them in about 1971 or so . failed then for several yrs more always experienced the...
Very carefully (: If it has any age on it then you are looking at having to do something .. It will stink to high heaven when you do break it down ,...
Send me a photo to my e/m and as good a close up as you can get ,, is the white a yellow whitish dusting and more around the Gills then along the...
Joe with that bullet and age of system I'd slow it up and skim as dry as possible . Cut the skimmer supply back and lower the air injector to make...
flow the total water volume of the fuge through the fuge per hr.. say its a 20 gal then flow 20 gph give or take .
what tiger mike said +1 :) it wil never work for long
Hang on or in sump ?
I would just let it be and light it on Reverse Photo period and simply let the grass grow and allow the bugs to come and take hold and get well...
Tank is still way to new to be adding much at all really I'd not add any animals for a month or two Te Phos reactor and some ferric oxide media will...
I'd start with a good skimmer and a phosphate reactor..
Corn flakes in a can or hydraulic sandwich
a dragon aka Bar goby but not really needed for tha little amount of sand good circulation will keep it cleaned and you have plenty of that.. How...
Yes its to deep for a non sand bed and not deep enough for a sand bed . I'd get it back to about 1.5 to 2 inches on average level on the bottom ....
Beer works just as well as Vodka (:
Separate names with a comma.