Join 3reef now to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.
What's the news, win or loose...???
So, with a promise to return the pan...combined with a bit of wine, chocolate, and flowers....she brought me the pan...:-) [IMG] And....her hobby...
Ca Reactor Well, I've been making noise that it was time to get serious about starting up the Ca Reactor... I don't yet have Ca and Mg at the...
I am using it during the startup of my current system. It is a quick, repeatable, and "easy enough" to use kit... However, as I'm running out of...
Phosphate...yes. A LFS can run a test for you if you want to save the cost of a kit. I did not look at your setup, are you running phosphate...
If it ate, agreed...there may be hope...It would also be good to check you PO4.
Sorry...it does not look promising....
That will stop the gurgling....and get you into a smooth siphon mode....but one or the other will take the majority flow...if you can get it to the...
Sounds like you have the tank dialed in....try feeding it...best of luck... Before I understood that the white Sebae's were actually sick/starved,...
I too run two overflows, one to the Refugium and one to the Sump...however the Refugium drains into the sump and I have only 1 return pump. Using...
Is it very white or more brown in color...white is bad... You can try to spot feed it with a very fine mixed meat based feed... What are your...
Very Nice!
The current in your overflow may be a bit too much for it while it is weak. Any chance you have a another way to keep it in some quieter water? If...
I have run the Mag 3, 5, & 9 for a while...I find that they work well. You will need to allow for maintenance of these pumps as the impellers need...
In short, the horizontal leg of the tee with the 90 should be set to the level you want to maintain the water level in your over flow at...Otty is...
I like the idea of a tube/valve/silencer...Sounds like my weekend project...Since I have to re-adjust any way...
Congratulations to you both!!
Instead of a nail, I have used a drill index and moved from one to the next. Observation...I'm likely too large now...the smaller the hole, the more...
Thanks.
As others have noted, these all work well. What size return pump do you currently have or plan to install...In my setup, this pump is of sufficient...
Separate names with a comma.