Search Results

to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.

Search Again
Page 1 of 3
  1. wfb2270
    Post

    my first attempt at drilling and cutting glass

    not sure but i can tell you that the tank i broke was a Top fin from petsmart. It was only a 10 gallon tank but still the glass seemed very thin...
    Post by: wfb2270, Nov 20, 2009 in forum: I made this!
  2. wfb2270
    Post

    mechanical filtration - to use or not?

    i removed my canister filter a couple months ago, then removed the bio-wheel from my hang on filter shortly after. Just removed the hang on filter...
    Post by: wfb2270, Nov 20, 2009 in forum: Filters, Pumps, etc..
  3. wfb2270
    Post

    my first attempt at drilling and cutting glass

    second attempt SUCCESS, drilled a couple holes tonight went great, very easy. put some tape back behind the holes i was drilling to hold cooling...
    Post by: wfb2270, Nov 19, 2009 in forum: I made this!
  4. wfb2270
    Thread

    bubble prevention

    i just finished gluing the first two baffles in my sump for the bubble trap, waiting for the silicone to dry a bit before putting the third. i had...
    Thread by: wfb2270, Nov 19, 2009, 3 replies, in forum: I made this!
  5. wfb2270
    Thread

    Light cycle with my new lights

    So i just put my new light fixture on (Nova extreme pro) and was wondering what the best way to set up the timers? its a 6 bulb T5 with 3 10,000k...
    Thread by: wfb2270, Nov 18, 2009, 1 replies, in forum: T5 Aquarium Lighting
  6. wfb2270
    Post

    Ammonia test kits acting very strange

    I may be a little confused, but i have an API test kit as well and the ammonia test colors are a green/yellow scale not yellow/red. But my ammonia...
    Post by: wfb2270, Nov 17, 2009 in forum: General Reef Topics
  7. wfb2270
    Post

    Looking for a swimmer

    i have a melanurous wrasse with my yellow wrasse. They swim around together most of the day. I like the color contrast between the 2.
    Post by: wfb2270, Nov 17, 2009 in forum: Tropical Fish
  8. wfb2270
    Thread

    Light Control

    just wondering if there was anything on the market for controlling T5's. Kind of like a dawn/dusk thing. My Nove extreme pro 48 in 6X48 is coming in...
    Thread by: wfb2270, Nov 17, 2009, 1 replies, in forum: T5 Aquarium Lighting
  9. wfb2270
    Post

    Yet another Newbie

    oh yeah, forgot. flow through the refugium should be pretty low. so you may want to put the return section in the middle, so you can slow down the...
    Post by: wfb2270, Nov 16, 2009 in forum: New To The Hobby
  10. wfb2270
    Post

    Yet another Newbie

    also a newbie so dont take my advice as law: sump setup sounds good, the second baffle can be the same height or shorter dont think it matters,...
    Post by: wfb2270, Nov 16, 2009 in forum: New To The Hobby
  11. wfb2270
    Post

    my first attempt at drilling and cutting glass

    good idea, i'll probably try that later this week, the water was running out the backside as i drilled pretty quick. was the oil hard to rinse off...
    Post by: wfb2270, Nov 16, 2009 in forum: I made this!
  12. wfb2270
    Post

    Nirate at 20ppm help

    i cant seem to get my under the 10-20 range as well. i am assuming its the tap water i am using. just bought a new light fixture, and am building...
    Post by: wfb2270, Nov 16, 2009 in forum: Water Chemistry
  13. wfb2270
    Post

    my first attempt at drilling and cutting glass

    yeah i definitly plan on slowing it down a little next time. i did have a pool of water keeping it cool. any idea on how many holes this bit can...
    Post by: wfb2270, Nov 16, 2009 in forum: I made this!
  14. wfb2270
    Post

    Skimmer acting funny

    figured it out...............never called AquaC cause after i cleaned the injector it went away (wasn't it though). i feed tonight and put a little...
    Post by: wfb2270, Nov 16, 2009 in forum: Protein Skimmers
  15. wfb2270
    Thread

    my first attempt at drilling and cutting glass

    failure....... in the process of building a sump/fuge using 2 tanks for my 55 gallon. cut some of the baffles today, didn't go to bad although its...
    Thread by: wfb2270, Nov 16, 2009, 14 replies, in forum: I made this!
  16. wfb2270
    Post

    Brown/Diatom Algae in Nano Tank???

    quick note on Bio-wheels. I have been fighting high nitrates for months. (60+) i wasnt getting anywhere untill i removed my bio wheel, and canister...
    Post by: wfb2270, Nov 15, 2009 in forum: Algae
  17. wfb2270
    Post

    weird feather duster

    How are your parameters, i thought i read they can come out when water quality drops.
    Post by: wfb2270, Nov 15, 2009 in forum: Inverts
  18. wfb2270
    Post

    small black spots on glass

    opps, sorry. here is the pic
    Post by: wfb2270, Nov 15, 2009 in forum: Algae
  19. wfb2270
    Post

    small black spots on glass

    tired to take a pic, not sure if you will be able to see them. Thought maybe coralline untill i was able to wipe them off with a mag float. Not...
    Post by: wfb2270, Nov 15, 2009 in forum: Algae
  20. wfb2270
    Thread

    small black spots on glass

    i noticed a bunch of small translucent black almost purple spots on the glass tonight? inot sure if its algae or not?????? any ideas??? spots are...
    Thread by: wfb2270, Nov 15, 2009, 4 replies, in forum: Algae
Showing results 1 to 20 of 49 Next >
Search Again
Page 1 of 3