Join 3reef now to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.
So, the "IN" reading is after the RO and before the DI? If so, then you're getting good rejection with your RO. I get 0 PPM on the output of my RO...
All of my return lines are the fan shaped flat-nozzle lockline type, and I just fan them out onto the surface of the water, which makes for great...
you can get an inline TDS meter to keep up with your progress... I like the ones that have a TDS count on the In and Out. got mine for less than...
wet skimming means you will have more water into the collection cup. If you're wet skimming, be careful that you have enough room in the collection...
I use soap on my hands sometimes if I have grease/ dirt on my hands from working on cars or other stuff... I normally use just a little dawn dish...
use a powerhead to agitate the surface a bit... since you just started, it will eventually go away... probably very small particles of dust/ sand...
your ph is a bit low... since you just set it up, it could take a day or two to stabilize... but I would keep an eye on it and slowly add some buffer...
disturbing the substrate is likely to start a mini cycle... you could take out and replace whats there, just keep an eye on your params... a 10-15%...
also makes a good tool for around the house to find where you are losing heating/ cooling efficiency through walls, ceilings, windows, door seals,...
While on the subject of favorite reefers... I'm also a big fan of Ron Shimek's papers...
It really depends on your tank's needs, I suppose. Three or four possible scenarios: 1. Nitrate/ Phosphate reduction: Grow some cheato and maybe...
Gotta Love Randy Holmes-Farley!
My yellow clown goby follow me around the outside of the tank and likes to sit on anything new I put in the tank. A perfect example is how he went...
that is really cool... since it's a HOB design, it's too bad they didn't make the back out of black acrylic, so you could truly get the benefit of...
Steve, Thanks for the input. When I started dosing calcium, my thoughts were "since my dkH is so high at 11, I don't need to worry about dosing or...
SG - 1.025 Mg - 1500
well, I was dosing Brightwell's calcion... was dosing at night after the lights went off and my ATO has super buffer dkh... I think the dkh wasn't...
Will or can dosing calcium lower ph and alkalinity?
Separate names with a comma.