4.3 Nano particles on surface no filter

Discussion in 'Filters, Pumps, etc..' started by Mobalized, Oct 18, 2011.

to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.

  1. Mobalized

    Mobalized Teardrop Maxima Clam

    Joined:
    Sep 13, 2011
    Messages:
    828
    I just set up a 4.3g rimless cube with some live rock from my main tank and its currently just hanging out, after about 3 days there is starting to be some particles sitting on the surface. I have a variable power head turned down to 50gph which is directing most of the water flow at the surface. I would prefer to not have to put a filter on the tank. But does anyone have any suggestions, could this be just from the new substrate that is on the bottom? Should I just skim the surface with a brine net? Or put a filter on the tank?
     
    Mobalized, Oct 18, 2011
    Mobalized, Oct 18, 2011
    #1

    2. Click Here!

  2. Mr. Bill

    Mr. Bill Native Floridian

    Joined:
    May 28, 2011
    Messages:
    4,874
    Location:
    USA
    Hard to say what it's from, but I think you should be fine just skimming with a net.
     
    Mr. Bill, Oct 19, 2011
    Mr. Bill, Oct 19, 2011
    #2
  3. NanaReefer

    NanaReefer Fu Manchu Lion Fish

    Joined:
    Jul 26, 2011
    Messages:
    1,911
    Does it look sort of oily?
     
    NanaReefer, Oct 19, 2011
    NanaReefer, Oct 19, 2011
    #3
  4. Mobalized

    Mobalized Teardrop Maxima Clam

    Joined:
    Sep 13, 2011
    Messages:
    828
    I wouldnt say oily look just like small particles of dirt or sand of some sort. The surface is churning pretty good and it still sits on top.
     
    Mobalized, Oct 19, 2011
    Mobalized, Oct 19, 2011
    #4