Anemone slime and algae bloom

Help, so sometime last week i drained and tried to drill my 6g nano reef to set up a turf scrubber. But the glass broke and i had to cut a new piece, drill it, and glue it, let it cure for 24 hrs., so my reef sat in a bucket with my usual lighting, and an aerator for 2 or 3 days. I also had my HOB power filter on my 55g FOWLR to maintain my filter media bacteria. I got it set up on friday with the scrubber and all. I filled the tank up with 5g of new reef water from the lfs and a few gallons of the old water but now, on monday, i have an algae bloom of mostly orangish brown algae and a little maroon cyano. I also noticed my warty anemone leaving thick slime around the rim of his hole in the LR when he retracts. Could his excessive slime have caused the bloom? Any advice? here's a pic, notice the filthy SPS skeleton on the left and the 2 small rocks in the front are usually white, my astraea behind the nem also is usually mostly white.

 

right click on the pic and select view image

 

did u check ur salinity and prams ? if so what r they.... did u test the new reef waters salinity ?it might have been fresh ro di water :O

 

the salinity is 1.020, working on nitrates

 

ive waited 5 out of 10 minutes for the color to form but so far it looks like 12.5 mg/l

 

Nitrate tested about 11~12 mg/L

 

Why are you running the SG at low?

 

I have some Instant ocean fish only, should i try to mix in some?

 

I would mix up some IO, let it sit for 24 and do a water change, and bring up the SG to at least 1.023 over 3 or 4 days. The anemones maybe a little stressed.

 

What level should i get it to and how much do you recommend i start mixing in