Any tips for installing ATI 48" PM T5 fixture

Discussion in 'Reef Lighting' started by Mikro402, Feb 12, 2011.

to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.

  1. Mikro402

    Mikro402 Astrea Snail

    Joined:
    Jan 31, 2011
    Messages:
    38
    Location:
    Omaha,NE USA
    I will be getting this fixture soon and was wondering what is the best way to layout/locate a board over the tand to mount the fixture. I figure I will need a board because I doubt I will hit the joists where I need them.
    The shipping weight on the fixture is 31 lbs. and 5 lbs. for the bulbs.(of course a lot of it is packing)

    TIA,

    Mikro
     
    Mikro402, Feb 12, 2011
    Mikro402, Feb 12, 2011
    #1

    2. Click Here!

  2. crank2211

    crank2211 Purple Spiny Lobster

    Joined:
    Jan 13, 2009
    Messages:
    460
    Mikro, to hang my ATI fixture I found a drywall anchor from Lowes from a company called "Toggler". They have a product called Toggler "TB" Plastic Toggle Drywall Anchors. Each one is rated to hold over 100lbs. I have two mounted to my ceiling above the tank to hold my 4x54W Sunpower fixture. The ATI ceiling mounts cover them up nicely and you can't even tell they're there. It's a very clean look. I kept a close eye on them for the first few days and now feel very confident in them. It only cost a couple dollars for a package of 5.

    Here's their site:
    Toggler Plastic Drywall Anchor | Plastic Fasteners, Plastic Toggle Bolts, Plastic Wall Anchors

    [​IMG]
     
    crank2211, Feb 12, 2011
    crank2211, Feb 12, 2011
    #2