AquaC EV-240 or ETSS 600 XR / ETSS 800 XR

Discussion in 'Protein Skimmers' started by meshari, Apr 3, 2009.

to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.

  1. kgross

    kgross Skunk Shrimp

    Joined:
    Mar 7, 2009
    Messages:
    250
    Location:
    Nampa, Idaho
    I will say if you are flowing 900 g/h through the skimmer you should have a 900 g/h pump for the return so you maximize the overflows in your tank.

    Kim
     
  2. Click Here!

  3. Powerman

    Powerman Giant Squid

    Joined:
    Oct 3, 2008
    Messages:
    3,460
    Location:
    Colorado
    Well the 3500 is 900 gph, and the 7500 is 18gph. The EV-240 needs a Mag 12 or a mag 18. So the 3500 would be underpowered, but the 7500 would be best.

    I would e-mail AquaC and ask how much flow is actually going through the 240 with a mag18. It isn't 1800 gph I assure you.
     
  4. meshari

    meshari Astrea Snail

    Joined:
    Jan 15, 2009
    Messages:
    60
    Location:
    Kuwait
    I would like to show some picture... but how do I upload? If I click on image.. it ask me a URL !!?? My pic is on my computer not on the net.
     
  5. meshari

    meshari Astrea Snail

    Joined:
    Jan 15, 2009
    Messages:
    60
    Location:
    Kuwait
    The only way I put a picture is through the camera icon picture on my side bar where my username, location etc...
    I need to go to the store to get a peice of T piping for my return pipe as in the drawing I have two return pipe.. I would like to connect them to get to be one final pipe going in the sump... or put another T at the end.. so two pipe being one then two exit for the water... insted all the way two pipe...ideas :p
     
  6. meshari

    meshari Astrea Snail

    Joined:
    Jan 15, 2009
    Messages:
    60
    Location:
    Kuwait
    Well I am back... from shopping :p

    I bought the Aqua Medic Turboflotor 3000 as the Aqua C EV-240 was not enough for my tank and the EV-400 won't fit under. As for the ETSS 800 XR well they had the 600 on their tank but didn't seem very good plus I need to buy a pump for 150$ and the 800 XR for 600$ as for the Aqua Medic is only 350$ with pump.

    I went with my feeling as I have the Aqua Medic 1000 (rated 125gal) on my 150gal and work very good so now I have the 3000 and reated at 375 gal on my new tank 244 gal I beleive it will do extreamly well.... I wish some one can tell me how to do the pictures here so I can show you guys :(

    I bought Salt 5 bags each 50gal=250 gal of Marine Enviroment brand which they say is the best (I think if you have a perfect water) but for me even with three filter on my water I still have alot of phosphate and etc... I don't have RO water. But enough filter and to reduce it.

    I got a Weipro Calcium reactor KA-400L that I will use for phosphate insted.

    I got two salt water 4.4 gal just for bacteria, etc... :)
     
    Last edited: Apr 7, 2009
  7. meshari

    meshari Astrea Snail

    Joined:
    Jan 15, 2009
    Messages:
    60
    Location:
    Kuwait
    [​IMG]

    Mt new tank.. with out the hood (open hood from the top), Acrylic Tank
     
    Last edited: Apr 8, 2009
  8. Click Here!

  9. meshari

    meshari Astrea Snail

    Joined:
    Jan 15, 2009
    Messages:
    60
    Location:
    Kuwait
    [​IMG]

    The return water to the tank using a T pipe...
     
    Last edited: Apr 8, 2009
  10. meshari

    meshari Astrea Snail

    Joined:
    Jan 15, 2009
    Messages:
    60
    Location:
    Kuwait
    [​IMG]

    The weir... you can see two pipe for the sump... and my return pipe
     
    Last edited: Apr 8, 2009
  11. meshari

    meshari Astrea Snail

    Joined:
    Jan 15, 2009
    Messages:
    60
    Location:
    Kuwait
    [​IMG]

    My piping in the sump
     
    Last edited: Apr 8, 2009
  12. meshari

    meshari Astrea Snail

    Joined:
    Jan 15, 2009
    Messages:
    60
    Location:
    Kuwait
    [​IMG]

    Piping in the sump
     
    Last edited: Apr 8, 2009