ATO suggestions for 24g nano

Ok I am adding water daily or every other day. I am looking to see if anyone has a 24g nano that can suggest an ATO system. My tank is not by a sink or anything so will haev to store a bucket/bottle of RO/DI water by the tank. So let me here some suggestions..

 

i built a 5 gallon tank that sits behind my DT and it is controlled by a float, it works great

 

float valve and pump? orrr float valve and asov (automatic shut off valve) connected to your RO/DI unit...

 

Is there a DIY anywhere? I can't hook it up to my RO/DI unit its to far from my tank.

 

huh?

 

you dont want to have it on your ro/di unit at all just a plexi tank gravity fed to a float on your sump

 

The ASOV is a valve where you have constant flow through your RO unit...and when the float valve closes up, it creates back pressure and turns a "piston" and shuts off the unit. pretty convenient!! and if the float valve gets stuck, it would be really hard to have a considerable amount of water overflow because RO units put out water so slloowww

 

don't have a sump.. Nano is all in one so just the pump chamber. sorry total n00b here so learning as i go. And I am learning i still have alot to learn. My HQI lighting is just eating water like no tomorrow. My work schedule is keeping me super busy so don't want my fish to suffer.

 

hey Ermano are you talking to me?

 

you just need a single line going into the tank...for example, you could have it going to the back of the tank