Brenton's Mr. Aqua 12 gallon long reef build

Discussion in 'Show Off Your Fish Tanks!' started by brentonwoodruff, Aug 26, 2012.

to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.

  1. rc_mcwaters3

    rc_mcwaters3 Clown Trigger

    Joined:
    Dec 18, 2010
    Messages:
    2,036
    Location:
    Valdosta, Ga
    two big islands and a bridge connecting them both sounds like a good compermise
     
  2. Click Here!

  3. chelseagrin

    chelseagrin Fire Goby

    Joined:
    Dec 13, 2011
    Messages:
    1,346
  4. chelseagrin

    chelseagrin Fire Goby

    Joined:
    Dec 13, 2011
    Messages:
    1,346
    this is cool as well, but then you always run the risk of collapse, even if you have the rock secured fairly well there is always the possibility.
     
  5. brentonwoodruff

    brentonwoodruff Fire Worm

    Joined:
    Feb 16, 2012
    Messages:
    155
    Location:
    Prescott, AZ
    I'm comfortable with making a small bridge as long as it is all one piece, however I'm not very comfortable with a large or multi-piece bridge.
     
  6. brentonwoodruff

    brentonwoodruff Fire Worm

    Joined:
    Feb 16, 2012
    Messages:
    155
    Location:
    Prescott, AZ
    Updates!

    Sorry for the long delay everybody, I have been working on this I promise but as stated earlier this is one slow build, and probably the best quality of any I have done to date! stand painted but not yet finished, still have to do the trim around the edges and cut a front piece and make doors for the front, but since I've got to get this running in two weeks, well the doors will wait. Starting to do the plumbing in the back but I've got to run out and get a hole saw + several more pieces I neglected to get the first time. Also need to make the in tank overflow. Oh so much to do and so little time. Here is a current over all shot as well as a shot of the sump (baffles still to come)
    [​IMG]
    [​IMG]

    And here is my current rock layout...Thoughs?
    [​IMG]
     
  7. DBOSHIBBY

    DBOSHIBBY Sleeper Shark

    Joined:
    Jul 27, 2009
    Messages:
    2,557
    Location:
    Detroit, MI
    like the scape alot bro. looks like you go everything ready to go!
     
  8. Click Here!

  9. brentonwoodruff

    brentonwoodruff Fire Worm

    Joined:
    Feb 16, 2012
    Messages:
    155
    Location:
    Prescott, AZ
    Thank you. I just can't wait to get this thing up and running, if only that acrylic and pipe glue would dry a little faster...
     
  10. brentonwoodruff

    brentonwoodruff Fire Worm

    Joined:
    Feb 16, 2012
    Messages:
    155
    Location:
    Prescott, AZ
    Water test today! unfortunately the mag drive was leaking! pulled the faceplate off and the O ring inside the cover is completely twisted, probably leading to the leak, time to find a rubber O ring...
     
  11. exactlyobp

    exactlyobp Giant Squid

    Joined:
    Jan 24, 2011
    Messages:
    3,984
    Location:
    Cedar City UT
    Ive had a similar experience with my mag drive as well (used). Unfortunately Ive heard/read that Magdrives tend to leak when its run externally. Hope you find stuff you need to fix it..

    Love the scape tho!
     
  12. Corailline

    Corailline Super Moderator

    Joined:
    Sep 8, 2010
    Messages:
    19,652
    Location:
    It is a dry heat, yeah right !