Can't find flex tubing

Discussion in 'Filters, Pumps, etc..' started by SaltyClown, Dec 16, 2012.

to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.

  1. SaltyClown

    SaltyClown Sea Dragon

    Joined:
    Feb 21, 2011
    Messages:
    549
    I can't find 1 inch flex tubing that would be safe for fish and coral. My drain is one inch, but I do have a 3/4 inch that could be used for the drain. Same size a the return line. But I don't know if that would be smart. Tank is a 75 RR, return pump is the tunze silence 1073.05 . I was at Home Depot tonight but they said nothing they had was fish safe.
     
  2. Click Here!

  3. fishluver

    fishluver Sea Dragon

    Joined:
    Jun 9, 2009
    Messages:
    542
    Location:
    Chicago Illinois
    I just recently had that issue. I had tubing for 3/4" opening and the tube was 3/4" which caused it to split. It took me a while to find something, but i found some pond flex tubing that im pretty sure is 1". I got it from petland but any pond center should have some. It works awesome and i havent had any problems yet! I hope this helps,

    Fishluver
     
  4. Gresham

    Gresham Great Blue Whale

    Joined:
    Nov 7, 2002
    Messages:
    2,825
    Location:
    SF/Monterey Bay Area, CA
    HD employees cannot be trusted even on a simple thing of what they stock, or don't, so its best not to talk to them. Heck, they told me they didn't stock aquarium sealant when I asked if they had any in backstock. I took the HD employee to the very spot and showed the HD employee the stock tag. I've only bought it there a billion times.

    All the vinyl tubing they stock is aquarium safe. They also stock flexible PVC, but perhaps not at your location. I've found they typically stock it high up on the racks.
     
  5. lionfish77

    lionfish77 Flamingo Tongue

    Joined:
    Aug 6, 2012
    Messages:
    112
    Location:
    NY
    Why do people like flexible tubing vs. PVC? I think PVC keeps pressure better and is less annoying in a lot of ways.
     
  6. ReefPlayground

    ReefPlayground 3reef Sponsor

    Joined:
    Nov 17, 2007
    Messages:
    750
    Location:
    Los Angeles, California
    where do you live? We stock 1" flex line, but as someone pointed out, for a drain, why not use hard plumbing(pvc) or a standard 1" flex line that are designed specifically for aquarium overflow drains?
     
  7. 55gfowlr

    55gfowlr Zoanthid

    Joined:
    Jul 5, 2011
    Messages:
    1,107
    Location:
    Daytona Florida
    It allows you to move your return pump. If you do pvc, which I did, plumb the first 2 feet after the return pump with vinyl tubing.
     
  8. Click Here!

  9. skurious

    skurious Sailfin Tang

    Joined:
    Jun 22, 2009
    Messages:
    1,720
    Location:
    Cedar Rapids, IA
  10. SaltyClown

    SaltyClown Sea Dragon

    Joined:
    Feb 21, 2011
    Messages:
    549
    Thank you, were would I find that flex line made for aquariums?
     
  11. SaltyClown

    SaltyClown Sea Dragon

    Joined:
    Feb 21, 2011
    Messages:
    549
    PVC you lose more pressure. And all I need is a line 29 inches going aright down, then another line 44 inches going up at an angel. Should be simple, not using glue and bends in the lines.
     
  12. SaltyClown

    SaltyClown Sea Dragon

    Joined:
    Feb 21, 2011
    Messages:
    549