DIY 40G breeder sump Help

Discussion in 'Refugium' started by geemanaz, Apr 8, 2012.

to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.

  1. geemanaz

    geemanaz Plankton

    Joined:
    May 26, 2011
    Messages:
    5
    Im doing a DIY 40g breeder sump for my 95g tank and i want to know what best height to cut the glass baffles at for Skimmer Section Baffle/Refugium Section baffle/Return Pump Section Baffle .The equipment all be running is a ASM G3 Skimmer and Quiet One 4000 pump.

    thanks
     
    geemanaz, Apr 8, 2012
    geemanaz, Apr 8, 2012
    #1

    2. Click Here!

  2. pjracer

    pjracer Peppermint Shrimp

    Joined:
    Nov 9, 2009
    Messages:
    423
    Location:
    Dallas, TX
    Look up the Skimmer min and max requirments. Base the baffles off that. I would also look at a external pump. Dill a hole in the side. This will keep the reat out of the pump.

    What skimmer are you running. the G-1 or G1X. I would do the X rated 150 gallons.
     
    pjracer, Apr 8, 2012
    pjracer, Apr 8, 2012
    #2