drilling a established tank?

Discussion in 'General Reef Topics' started by dan az, May 19, 2012.

to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.

  1. dan az

    dan az Plankton

    Joined:
    Dec 27, 2011
    Messages:
    14
    Location:
    Prescott Valley az
    any one ever done it? I need to either drill my tank as is with fish and rock in it or just get a hang on overflow box. what are other peoples thoughts?
     
  2. Click Here!

  3. silor

    silor Sea Dragon

    Joined:
    Oct 16, 2009
    Messages:
    541
    Location:
    Las Vegas
    Welcome to 3reef, you did post in the wrong sub forum but the easiest way would be a eshopps overflow

    Drilling with everything would be a bad idea IMO
     
  4. dan az

    dan az Plankton

    Joined:
    Dec 27, 2011
    Messages:
    14
    Location:
    Prescott Valley az
    yea I couldnt decide which sub forum to put this in.
     
  5. steve wright

    steve wright Super Moderator

    Joined:
    Feb 17, 2009
    Messages:
    11,284
    Location:
    shenzhen Guangdong PRC
    I have moved this to the general section for you Dan Az

    I know it has been done before, someone on this site has done as you described
    I just cannot recall, who and when
    hopefully someone will come along and point us in the right direction later

    my preference would be for the overflow option
    it is certainly easier to do
    and it does not have the risks associated with drilling a tank

    if the tank was empty and something went wrong = irritating and inconvenient
    if the tank was stocked and water level lowered to drill and it goes wrong = panic time
     
  6. dan az

    dan az Plankton

    Joined:
    Dec 27, 2011
    Messages:
    14
    Location:
    Prescott Valley az
    thats kinda where I was leaning, I have been looking at the cpr overflows with aqualifter pump as they seem pretty disaster proof, any others out there or is the cpr basically as good as it gets?
     
  7. pwsk

    pwsk Spanish Shawl Nudibranch

    Joined:
    Apr 25, 2009
    Messages:
    97
    Location:
    kittery maine
    can it be done i was thinking of doing it has anybody done it
     
  8. Click Here!

  9. Mr. Bill

    Mr. Bill Native Floridian

    Joined:
    May 28, 2011
    Messages:
    4,874
    Location:
    USA
    +1

    I wouldn't recommend the cpr; the aqualifter is just another point for possible failure; if it breaks, you get a flood.

    OTOH, if you match an eshopps overflow with a return pump of similar GPH rating, you'll never have any problems with it.
     
  10. dan az

    dan az Plankton

    Joined:
    Dec 27, 2011
    Messages:
    14
    Location:
    Prescott Valley az
    even if you have a check valve at the top of the cpr? I have heard of people complaining that the utubes on the eshopps gradually collect bubbles and eventually break the siphon.
     
  11. silor

    silor Sea Dragon

    Joined:
    Oct 16, 2009
    Messages:
    541
    Location:
    Las Vegas
    The only way they lose siphon is be because people use a underrated return pump.
    I'm going on 3 months and don't have a single air bulbble in my utube.

    Just make sure you get the correct box and return pump or even better get a larger pump and dial it down just in case you want to add reactors to your plumbing.

    I can take pics to show you how mine is if you'd like.;D
     
  12. Jlobes

    Jlobes Coral Banded Shrimp

    Joined:
    Feb 19, 2012
    Messages:
    382
    I have an eshopps overflow, just got it a couple months ago. But, I love it. A bit noisy at times but that can be fixed. Most of my reefer buddies pushed me away from a CPR unit.(ironic, since they are made in the same town we live).
    +1 bad idea to drill an established tank.