Eshopps PF Nano Overflow

I am going to building a ten gallon frag tank with refugium and was originally trying to think of a pvc overflow but after alot of thought i was looking up an overflow box small enough does anybody know if the eshopps pf nano wil work?

 

The Eshopps PF-Nano would work very well for what you want to do. It's rated for up to 200 GPH but that is a very conservative number. It'll handle a lot more than that and stay pretty quiet.

Here's a video of mine on a 10 gallon tank I had a mantis in. I had the return pump wide open just for this video.

 

What kind of return pump are you using>

 

what are the dimensions of that? somebody suggested using it for my 5 gallon nano led tank but someone else said it would take up half the tank

 

google wins again.

Eshopps PF Nano Overflow Box - Up to 50 gallons - 4 in. x 2.5 in. x 8 in. | Wet/Dry Aquarium Filters | Filters | Aquarium - ThatPetPlace.com

Eshopps PF Nano Overflow Box - Up to 50 gallons - 4 in. x 2.5 in. x 8 in.

The Eshopps Nano Overflow Box carries water from your nano display tank to a sump or wet/dry filter. Perfect for tanks under 50 gallons that were not pre-drilled or did not come with built-in overflow boxes. This 4 inch by 2.5 inch box has a max flow rate of 200 gph.

4" x 2.5" x 8"

 

the demensions are i think 4" x 2.5" x 8.5"

 

The pump was a junky Odyssea 500. The head height was less than 3 feet, I'm guessing that there was around 375gph going through the overflow.

Here's all the dimensions and a little history on the OF.
http://www.3reef.com/forums/eshopps-inc/eshopps-pf-nano-overflow-94917.html#post967085