Frogspawn help!

Hello guys i need help with my frogspawn. It has 4 heads and today i saw that the tissue was dying and it looks all white. My salinity is low at the moment, around 21, is that why?? It has good lighting and medium-high flow. Please help!

 

Low SG is where I would start.

Either do not top of with FW and turn off ATO if you have one, let evaporation take care of the issue. Or slowly (over the course of a day or two top off with a salt mix completely dissolved, make sure you are getting a accurate SG though, and do not attempt to fix the SG in a 24 hour period.

 

Agreed with Cheryl.

 

Ok thank you. I am not sure if we are doing it right, but we are making a few gallons of water and it will act as a top off/ raise the salinity. What should we make the salinity at to raise the salinity in the whole tank? Thanks!

 

I assume when you say 21. you mean 1.021? If so I would IME raise it .001 every day up to 1.025 ish.

 

Yup sorry its at .021. Okay thanks, its usually at .025 what should we make our water at in order to raise it up .01?

 

+1 to Cheryl.

if its at 1.021 top off at 1.022, then at 1.023, then 1.024, then 1.025.

 

Or just top off with 1.025 until the tank reaches 1.025. in your video i noticed the water level in your tank was low, how often do you top off?

 

Eh like once a week maybe. Its alot of work! Haha and ok we will shoot for .025 thanks! Do you guys think this IS the reason why the frogspawn is messed up?

 

Well One of the reasons I assure you.

It could be salinity location or light. Take it step at a time and youll find out which it is.