Has anyone ever heard of this

I have purchased a protein skimmer from my lfs i was wondering if anybody has heard of it or what they think. It's name is Aquarium Life Support System. Also if anyone knows about them can you help me out. I am having a hard time adjusting the bubbles so the foam is entering the collection cup I have nothing but water enter it so far. Kind of two question here.

Thanks
Tony

 

I have never heard of this brand or manufacture before.. But if its a venturi skimmer then adjust the water level so as it is about a 1/8 inch below the column the collection cup set on and open the air inlet if it is controllable ? and let it run it may take several days to start to foam. Sounds to me you are pushing the water level to high in the reactor chamber and is just filling the cup with a wet foam.. Most have a water level line on the somewhere ..

O.K I called a friend and he looked them up in a catalog and if you have the in sump model he said its very similar to the old Excalibur skimmers and what you need to do is slip the water adjustment on the side until the water level is like i said above about a 1/8 th of a inch from the rim the collection cup sets on.. what model did you get ? the 44V Magnum or a 22V skimmer ? But it seems they all work like the old Excalibur's I like my Excalibur works better then anyone I ever used on a small system.. Now that being said The Old skimmer called the Big Mommosa sucked looked very muck like the Excalibur's also.. so just set the water level as i said above and set back and let it run for a week. Give it time to make foam and brake in as they all have oils and stuff from the molding and gluing them together.

 

cool i have the 22 v it's in my sump which has a water level line on it. it seems when i line it up with the water level on the sump after a day or two the water goes below the level line. but my tank level is fine. i will try it out tonight
Thanks
Tony

 

Yes well they don't percolate 24/7 some days more then others and then again like i said it may take s week or more to break it in..What pump does it have a Rio 800 with the air injector line set on it ? the 800 S or something like that ?

 

yes the rio 800

 

It should be fine in a few days just set it and forget it everytime its stopped or level is adjusted it has to start all over from go again.

 

Tangster

I just wanted to say thanks for helping me out with my skimmer problem i had i set it and last night i was checking it out and finally i have whit foam entering the collection cup once again thanks:
Tony