Hello and how do i set my protein skimmer up

Discussion in 'Say Hello!' started by Curmon, Aug 25, 2007.

to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.

  1. Curmon

    Curmon Plankton

    Joined:
    Aug 25, 2007
    Messages:
    6
    Howdy everyone. My partner and I live about 2.5hours south of Sydney. We are relatively new to marine aquariums and have had ours running now for about 7 weeks. We live very close to the coast so set up our tank by collecting 160L of sea water - that was fun! It has live rock in it, two chromis fish, one bicolour angel, one sea-cucumber, a piece of brain coral, some other coral (not sure what) and some coral sand. I have a Jebo 180 protein skimmer and am not sure if I have set it up correctly. Should the air injection control be closed right up or open? I tried reading the instructions but gave up (they should be called destructions!).:confused: Hoping someone can help me. Thanks.
     
    Curmon, Aug 25, 2007
    Curmon, Aug 25, 2007
    #1

    2. Click Here!

  2. omard

    omard Gnarly Old Codfish

    Joined:
    Sep 28, 2003
    Messages:
    4,745
    Location:
    Silverdale, Washington
    [​IMG] To 3Reef!!!​


    GREAT! another new member from the land down under. ;D

    Sorry, don't have a "jebo" - But my sugguestion would be to put air-control valve in center...then adjust if skimmate is too think or too watery...your choice.



    The Tao of Marine Aquaria
    Tips for Our Hobby and Life

    © 1997 Adam H. Whitlock
    Edited By Elizabeth M. Lukan 11/25/00


    [​IMG]​



    [​IMG]
    ​
     
    omard, Aug 25, 2007
    omard, Aug 25, 2007
    #2
  3. Tangster

    Tangster 3reef Sponsor

    Joined:
    Aug 16, 2006
    Messages:
    5,644
    Location:
    Va/Ct
    Open the air control valve about 3/4 way and let it run a few days until it breaks in then adjust it for maw dry foam in the cup.. If it's mixing air and water in the reactor chamber then it will take off once all the oils and plastic has slimed over in a few days . But this in a general what to do :) You can adjust it as you go along you'll see what a little tweak one way or the other works best and go from there..
    I just put a Precision Marine Bullet 3 skimmer on line a few weeks ago and I just got it totally dialed in last week. A ETSS I know inside and out..
     
    Tangster, Aug 25, 2007
    Tangster, Aug 25, 2007
    #3
  4. Curmon

    Curmon Plankton

    Joined:
    Aug 25, 2007
    Messages:
    6
    Thanks for the help. The instructions were not very helpful at all, and you guys have been great. Will be back again with more questions. Particularly and what fish and other creatures to get next.
    Cheers
     
    Curmon, Aug 25, 2007
    Curmon, Aug 25, 2007
    #4
  5. coral reefer

    coral reefer Giant Squid

    Joined:
    Jan 9, 2006
    Messages:
    4,860
    Location:
    Wonderland
    Welcome to 3reef! you will be very happy here, as you will learn through trial and error to ultimately enable you to be successful for a long time!
     
    coral reefer, Aug 25, 2007
    coral reefer, Aug 25, 2007
    #5
  6. nOOb iHACK

    nOOb iHACK Astrea Snail

    Joined:
    Jan 5, 2007
    Messages:
    58
    Location:
    Orange County, CA
    Welcome to 3REEF!;D I see you got your protein skimmer going. Happy reef keeping!::)
     
    nOOb iHACK, Aug 28, 2007
    nOOb iHACK, Aug 28, 2007
    #6