light timer( light schedule)

The B+ should be run for 12 hours. Start them an hour before the other 2, and turn them off an hour after.

 

Reptile Terrarium Lighting Accessories: Coralife Power Centers at Drs. Foster and Smith

 

so can i run the b+ for 11 hours and then the another two for about 1 hour and then turn them off>

 

The idea is to have the other 2 on for 10 hours, and the 2 B+ on for 12 hours. That makes it so the B+ are on for an hour, then all four are on for 10 hours, then the B+ are on for one hour.

 

so in the morning have the 2 b+ on 1 hour before i put the 1 GE 6500k Daylight 1 ATI Purple Plus for 10 hours then. they will go off and then i will keep the 2 b+ on for another hour and then turn off.

 

It seems you got it Dellyjoe

but just to make sure

you have 4 lights
all of them are on for 10 hours (all 4 on at same time)
but 1 hour either side, 2 of the 4 lights are on or stay on, when the other 2 are off

Steve

 

Example. 2 ATI B+ from 10 am to 9 pm, 1 GE 6500k Daylight
1 ATI Purple Plus from 11 am to 8 pm.

 

FWIW, IME, these are junk. Don't last long at all. Iv'e tried coralife's digital and analogs... Exchanged the first one and trashed the second.

 

Probably but it should be labelled an appliance timer and not just a light timer in my experience. The appliance timers can take a higher surge or starting current without welding the contacts together and fluorescent and MH lights have a high starting requirement unlike incandescent bulbs.