Lowering pH?

Discussion in 'Water Chemistry' started by Matt Rogers, May 31, 2003.

to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.

  1. Matt Rogers

    Matt Rogers Kingfish

    Joined:
    Dec 31, 2000
    Messages:
    13,466
    Location:
    Berkeley, CA
    Pulled the test kit out. I am idiot. THere is an alk test in the Marine Basic. Hehe. Hey I just got this kit! ;D [smiley=dunce.gif] [smiley=crazy.gif]

    I did two tests to make sure.... alk is 2 meq/L .

    Looking at the Sea Chem instructions, I found something interesting, it says:

    "Natural sea water has a total alkalinity of 2-3 meq/L, but aquarium water should have a total alkalinity of 4-6 meq/L."



    pH is still off the scale, high 8's I guess.

    :p
     
  2. Click Here!

  3. Wrassman

    Wrassman Peppermint Shrimp

    Joined:
    Mar 9, 2003
    Messages:
    448
    Location:
    Stockbridge, GA,Georgia
    [glow=Teal, 2, 90%]Kalkwasser would be a good way to increase alkalinity in the tank. Of course, it will probably also raise your pH. Baking Soda (sodium bicarbonate) will raise your alkalinity as well, and it will have a negative impact on your pH level (it will lower it) What would be ideal is a Calcium Reactor, which would raise your Ca level and put CO[sub]2[/sub] into the tank, lowering your pH in the process.

    For the time being, if you are still interested, add some baking soda and bring up your Alk. This will have the net effect of lowering your pH.

    We still don't know what your Ca is, though. But, if you can't maintain Alk or pH, you aren't going to be able to maintain any kind of decent Ca level for very long.

    I have at least 12 links to great articles concerning Ca, Alk, and pH in the aquarium. If you are interested in pursuing this in depth, let me know, and I will share some of the links in this thread...[/glow]
     
  4. Matt Rogers

    Matt Rogers Kingfish

    Joined:
    Dec 31, 2000
    Messages:
    13,466
    Location:
    Berkeley, CA
    Hey dude -

    I'll try the baking soda trick after I let this simmer... just hooked up the Remora Skimmer. I think this thing might live up to the hype, it fired up foam damn quick even with a Rio. (I have a maxi-jet on the turtle tank I might swap with later.)

    With some skimming, a water change next week, and the addition of some macroalgae when the light gets here, I think we can get this in the ballpark.

    I'll try some of that stuff you mentioned then as well, thanks for your help Wrassman. Karma to ya...

    [smiley=2thumbsup.gif]
     
  5. arookeral

    arookeral Plankton

    Joined:
    Dec 9, 2006
    Messages:
    5
    I utilized the vinegar/water mix, about 8 teaspoons and it brought my ph down from 8.5 to 8.3...thanks
     
  6. arookeral

    arookeral Plankton

    Joined:
    Dec 9, 2006
    Messages:
    5
    thanks for the vinegar and water idea. it worked well to lower my ph
     
  7. Tangster

    Tangster 3reef Sponsor

    Joined:
    Aug 16, 2006
    Messages:
    5,644
    Location:
    Va/Ct
    First off a simple spike of say from 8.00 to 9.00 is nothing the spaz out about and if that is an issue for you best thing to use is Club Soda aka Co'2 .. As it will balance the Carbonates out with the Ca and not just lower the P.H like Vinegar will dropping PH to fast is as bad if not worse then spiking it upwardly .. Just a Idea if interested ? PH in its self means nothing now . I like to run my PH higher then many do . like near to 8.7 and try to keep it from getting below 8.3 ..Does wounder's for keeping pest algaes at bey..
     
  8. Click Here!

  9. Scoffer

    Scoffer Banned

    Joined:
    Aug 25, 2004
    Messages:
    310
    Location:
    Jacksonville, Florida
    my alk is 10.4 0r 3.7 meg/l.
    cal is 400
    pH is 8.2-8.4 (cheap test kit there)

    that all sound ok to yall?? (alk to high?)

    Scoffer
     
  10. ENGINE 41

    ENGINE 41 Astrea Snail

    Joined:
    Jun 28, 2007
    Messages:
    34
    ....
     
    Last edited: Aug 9, 2007