Need help with micro bubble problem in Coralife Super Skimmer

Discussion in 'Protein Skimmers' started by Chessplayer, Aug 8, 2009.

to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.

  1. Chessplayer

    Chessplayer Plankton

    Joined:
    Jul 18, 2009
    Messages:
    15
    I have been using this skimmer for the past 4 months. Works fine. Now suddenly there are a lot of micro bubbles all over the tank. I did a water change and the bubbles started. What did I do wrong and how can I fix it? Thanks much in advance!
     
  2. Click Here!

  3. lunatik_69

    lunatik_69 Giant Squid

    Joined:
    Jul 10, 2007
    Messages:
    7,933
    Location:
    Miami, FL
    Am not familiar with that skimmer, but it sounds like you need to check the air intake.


    Luna
     
  4. divott

    divott Giant Squid

    Joined:
    Mar 23, 2009
    Messages:
    3,658
    Location:
    holland landing, ontario ,canada
    how do you have the output setup? mine doubles back in the sump and never have a problem.
     
  5. Chessplayer

    Chessplayer Plankton

    Joined:
    Jul 18, 2009
    Messages:
    15
    It is HOB. Not sure what to check in the air input? Any thoughts? The micro bubbles are coming from the bubble diffusion chamber bottom.
     
  6. divott

    divott Giant Squid

    Joined:
    Mar 23, 2009
    Messages:
    3,658
    Location:
    holland landing, ontario ,canada
    might need to use a filter sock then.
     
  7. Chessplayer

    Chessplayer Plankton

    Joined:
    Jul 18, 2009
    Messages:
    15
  8. Click Here!

  9. divott

    divott Giant Squid

    Joined:
    Mar 23, 2009
    Messages:
    3,658
    Location:
    holland landing, ontario ,canada
    attach one to the output from the skimmers return hose. a fine filter sock should "break" up the bubbles before going into your tank. also have you tried adjusting the microbubble level ?
     
    Last edited: Aug 8, 2009
  10. Chessplayer

    Chessplayer Plankton

    Joined:
    Jul 18, 2009
    Messages:
    15
    I fixed it. Trimmed the output hose about an inch so that it didn't reach the end of the bubble diffuser box and that was it. Next time I will RTFM.