Need opinion on 48" Marineland Reef Capable LED Fixture

Discussion in 'LED Aquarium Lighting' started by russki1313, Aug 7, 2011.

to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.

  1. russki1313

    russki1313 Astrea Snail

    Joined:
    Jun 3, 2011
    Messages:
    43
    I am looking at buying a 48" Marineland Reef Capable LED Fixture
    THis is going to go on a 110 gallon tank i am setting up now.
    I plan on doing a FOWLR a maybe some soft coral down the line.

    http://www.petsolutions.com/storefr...system/prodMarinelandHighOutputLEDLights.html

    My tank dimensions if i remember correctly are: 48wide x 20 high x 18 deep

    Would this be adequate amount of light.
    Anything else in this price range of under $400 you would recommend
    Thanks
    Kevin
     
  2. Click Here!

  3. tom.n.day

    tom.n.day Eyelash Blennie

    Joined:
    May 17, 2011
    Messages:
    1,276
    I am going to follow this thread. Have you tried boostled yet?
     
  4. ReefBruh

    ReefBruh Giant Squid

    Joined:
    Jul 11, 2010
    Messages:
    4,813
    Location:
    Clearwater, FL
    If you are doing a FOWLR, if you plan on going full reef you are going to need two of them. They have some penetration but no spread. I know of an LFS that had to put two on their 90 gallon reef to get the spread from front to back.
     
  5. khowst

    khowst Bangghai Cardinal

    Joined:
    Mar 14, 2011
    Messages:
    1,390
    Location:
    FLW, Mo
    I've seen alot fo complatints about those lights lately. I guess they burn out & LED's strings die and what not. I personally do not own one, but I would definitely say make sure you so some research on here & on google before making up your mind.
     
  6. inwall75

    inwall75 Giant Squid

    Joined:
    Sep 10, 2003
    Messages:
    7,172
    Location:
    America
    One of my customers put one of these "reef INCAPABLE" lights over his 24 gallon JBJ nano cube that was populated only with low light requiring zoanthids and mushrooms. He loved the look so much (with the glitter lines like a MH) that he sold his old power compact hood. Here's what happend;

    1) Some zoanthids turned brown. Other zoanthids turned brown, and then died.
    2) The mushrooms doubled in size but not in a good way. They are trying to maximize surface area to get light. They were also no longer laying on the rock. They were stretched up into the water column to try and get closer to the light. They basically looked like funnels attached to his rock.

    He came into the store yesterday and I have to try and find him a replacement hood because everything grew fine under power compact lighting.

    Great for fish. Not so great for corals. Note how the packaging gives you the rating in lumens. Well, the lumen reading means diddly squat to corals. They obviously didn't want to post PAR or PUR ratings for a reason.
     
  7. insanespain

    insanespain Ocellaris Clown

    Joined:
    May 3, 2011
    Messages:
    1,479
    Location:
    Illinois
    Those tank dimensions you posted I believe are the dimensions for a 75 gallon tank, if my memory serves me correctly.

    As for the light, don't waste your money. I've seen numerous posts about this light, people complaining about leds burned out constantly. Not to mention my LFS has one and I touched it one day and about needed a skin graph when I got done. They run extremely hot, which explains the leds failing. Plus as others have stated, they have terrible light output.

    If you are somewhat handy, a DIY led light is the best value, and there are several posts here that can help u get started. If you want to buy a ready to go unit, I would suggest boostled.

    Sent from my Droid using Tapatalk
     
  8. Click Here!

  9. Bill1701d

    Bill1701d Plankton

    Joined:
    Aug 26, 2011
    Messages:
    2
    Location:
    Castro Valley, CA
    I have heard that Marineland is having problems with the transformer for their 4 foot LED. They are supposed to be working with the manufacturer and getting it resolved in a month or two.
     
    Last edited: Sep 6, 2011