New Member - New Project

Discussion in 'New To The Hobby' started by nemo31, Apr 5, 2008.

to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.

  1. aquaboy

    aquaboy Panda Puffer

    Joined:
    Jul 27, 2007
    Messages:
    2,112
    Location:
    Tatamy, PA
    and will freak your fish out and any corals you want to keep will die in hours.........
     
  2. Click Here!

  3. nemo31

    nemo31 Astrea Snail

    Joined:
    Apr 5, 2008
    Messages:
    43
    Location:
    Dubai
    Came home tonight and got stuck in again !!!
    The little Chinese man had no problem erecting the cabinet ;) and I got to spraying the rear of the tank :eek:. Please note for anyone who wishes to do this, as over spray seams to get everywhere !!! In an apartment I had no choice to just do it but I now could audition for the blue man group !:-/:-/:-X:-X
    First of all I masked up the area and walls and everywhere else I could, then wiped the area clean on the tank. The first coat of paint was a green paint with glitter in 8), after two coats and letting it dry I then used dark blue. The result is a :eek: PIMP MY TANK :eek: colour which when the light catches it glistens. Nice if I do say so myself. A bluely – green sparkly colour !!! 8)8)
    After an hour of cleaning over spray from the floor, side boards and myself :-X I then got the filters stocked up with media. I have three types which are the following: please comment on this to ensure I am using media which will not harm the fish, the pet shop & the box said it was all ok for sea and fresh water fish. :confused:
    1) Bio Ball – Bottom of the external filter
    2) Ceramic Boi-Ring – Top of external filter & in “Crappy In-tank filter”
    3) High Absorptive Carbon – Middle of external filter
    Then I got my new air pump and cut a hole in the other cupboard for lead and hoses. First air hose will go in the last compartment of the “crappy filter” (which is on top of the tank) with the ceramic boi-ring, the other air hose will go to the skimmer once it arrives.:cheesy:
    I have the heater all cleaners and food for the coral and fish once they arrive, also have the marine salt ready !!! 8) I have a few items which I now have to wait for :angry: , which I hope will be with me on Thursday.;D
    Please see pictures and comment if you see anything wrong !!
     
  4. nemo31

    nemo31 Astrea Snail

    Joined:
    Apr 5, 2008
    Messages:
    43
    Location:
    Dubai
    Now the pictures !!!

    Pictures
     

    Attached Files:

  5. omard

    omard Gnarly Old Codfish

    Joined:
    Sep 28, 2003
    Messages:
    4,745
    Location:
    Silverdale, Washington
    Dude, you are moving really fast.

    Slow down and take a breather.

    Is this going to be a fish only tank?

    If not, you need to go thru the cycle process (nitrogen cycle) before adding any fish.

    Am not certain filtration system going to be adequate for any significant fish load.

    Planning on adding a skimmer?...if so, get it up and running before adding any fish.

    Tips on mixing SW...

    In Dubai, even your fresh tap water is going to have a high salt content as it is almost all desalinated water anyway.

    If you are using bottled water. Aerate well with a air stone before using.

    Get a refractometer to check sg as most swing-arm type hydrometers are notoriously inaccurate and can result in major fish loss if incorrect reading results.

    Test sg at same temp as that that will be in tank.

    Hope all goes OK.

    Know it is all an exciting adventure.

    Please share experiences with the rest of us.


    Good Luck!
     
  6. nemo31

    nemo31 Astrea Snail

    Joined:
    Apr 5, 2008
    Messages:
    43
    Location:
    Dubai
    And there's more !!

    can you help ?
    My tank is a semi circle, at the widest point 2ft across.
    4 ft at the rear of the tank and a depth of 22 inches.

    How many gallons is my tank.
    The guy in the shop said 310 litres but that means a 92 gallon tank ?
    Can anyone give me the correct figure ???

    Help !!
     

    Attached Files:

  7. nemo31

    nemo31 Astrea Snail

    Joined:
    Apr 5, 2008
    Messages:
    43
    Location:
    Dubai
    I will not add any fish untill the tank has been cleaned ! equipment has arrived.
    I am a long way off even adding water... dont worry !!!
    I would like to have it up and running tomorrow if i could, but i can't so i'll enusre that everything is correct before water is added. hope this clears this issue up, i'm just trying to get as much done in the mean time while waiting for equipment to arrive. also some much needed advice form you guys before anything happends.

    Thanks for all of your replys
     
  8. Click Here!

  9. lunatik_69

    lunatik_69 Giant Squid

    Joined:
    Jul 10, 2007
    Messages:
    7,933
    Location:
    Miami, FL
    Im the same way, I like to speed up any part of a project if possible. Which in your case it can be done. The stand, filters, media, skimmer, lights etc...etc. After you add the last drop of SW to the tank, thats when you need to shift gears into SSLLOOWWW mode and become a patient person.
     
  10. baugherb

    baugherb Giant Squid

    Joined:
    Sep 8, 2007
    Messages:
    5,205
    Location:
    southington, ohio
    If you don't you'll regret it.... This is from someone who has learned the hard way....
     
  11. nemo31

    nemo31 Astrea Snail

    Joined:
    Apr 5, 2008
    Messages:
    43
    Location:
    Dubai
    Thanks guys, i have hint, SLOW. All of the koi ponds i have built you need to leave the pond untill the filter mature before you add the fish.
    Again all of your comments are welcome
     
  12. baugherb

    baugherb Giant Squid

    Joined:
    Sep 8, 2007
    Messages:
    5,205
    Location:
    southington, ohio
    All of us are just trying to help... Were all on your side and hope your tank does wonderful...... As long as you keep up with the pics.... LOL.....