Not level!

Discussion in 'ASAP' started by 3lilbrats, Dec 31, 2011.

to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.

  1. 3lilbrats

    3lilbrats Feather Duster

    Joined:
    Oct 13, 2011
    Messages:
    215
    Location:
    WESTERN MASS
    Ok, so I moved my tank because of unescorted reasons. I placed it on the new location and checked to se if it was level or not. I did level one side cause I knew beforehand I had to but do no check front to back and I filled my tank all the way and I don't know what to do now. Please help. The tank is about 3/8" off
     
    3lilbrats, Dec 31, 2011
    3lilbrats, Dec 31, 2011
    #1

    2. Click Here!

  2. ilikespam

    ilikespam Feather Duster

    Joined:
    Sep 26, 2011
    Messages:
    234
    Try to maybe add some shims under the stand.
     
    ilikespam, Dec 31, 2011
    ilikespam, Dec 31, 2011
    #2
  3. cosmo

    cosmo Giant Squid

    Joined:
    Nov 17, 2011
    Messages:
    6,166
    Location:
    southeast ohio O-H....
    ok, that was kinda tough to read, but i'm guessing the tank is lower in the front or rear?! Shoot a pic, but you could build a little frame, get a few basement jacks and some shims and do it that way! A pic or 3 would help alot! Not of the actual tank but of the tank with the area around it!
     
    cosmo, Dec 31, 2011
    cosmo, Dec 31, 2011
    #3
  4. 3lilbrats

    3lilbrats Feather Duster

    Joined:
    Oct 13, 2011
    Messages:
    215
    Location:
    WESTERN MASS
    The water is lower on the front. How I'm going to get it all level this is a 60gal cube. I will have to remove everything to put the shim on it or can I find a way to do it without removing everything? I'll get you a pic ASAP. FYI I live on an apartment complex.
     
    3lilbrats, Dec 31, 2011
    3lilbrats, Dec 31, 2011
    #4