PC lighting with Workhorse 5

I have a question about where you attach the green ground wire from the plug. (white to white) ( black to black) (green to ?). The worhhorse only has a black and white wire but the plug has 3 wires, I have replaced the ballasts the my fixtures, with the workhorse 5, and in that case I have grounded the green wire to the case. In this situation I have no case to ground it to so what do I do with it. I assume that I have to attach it to the casing of the ballast itself but I wanted to ask for sure.

Thanks,

Dustin

 

Green is ground. You got the right idea.

 

I thought that I had to ground it directly to the ballast but I was not sure.

Thanks 2in10

 

Welcome