Pin Point PH Meter

Discussion in 'Filters, Pumps, etc..' started by N8thanExpl0sion, Jul 31, 2012.

to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.

  1. N8thanExpl0sion

    N8thanExpl0sion Astrea Snail

    Joined:
    Mar 11, 2010
    Messages:
    43
    Location:
    Boynton Beach FL
    OK so.. I have one of these with a band new probe and I goofed and I am not sure how to fix it. Please take it easy on my I already feel pretty stupid

    I used 2 calibration fluids 7 and 10 but I placed them into coffee cups so they would not spill and confused which one was which. Before I figured out my mistake I changed the settings on the meter. ( how far I had to adjust should have been a sign :-( )

    Now I have things straight but I just can't get the unit to get to both 7 and 10 with the 2 POTs.

    Does anyone know how to fix this? Obviously since these are analog adjustments there is no reset. I just dont know which way to turn these and how far I should be spinning them.
     
    N8thanExpl0sion, Jul 31, 2012
    N8thanExpl0sion, Jul 31, 2012
    #1