Rapid LED kit for a 10g reef

OK, thanks.

 

For $5 more I can get the dimmable one? lol.

Biocube 14 Dimmable Retrofit Kit

 

Dim is nice feature..grab it if you can..Fans, highest quality LED and driver you can afford are mandatory..

 

Well those are all Cree, that I've been linking to. That's all RapidLED sells. I was trying to get the heatsink, fan, and dimmable driver in one package. I think that is it (biocube 14 dimmable kit).

 

This retrofit kit will fit seamlessly into your existing Biocube 14 hood (once gutted), and attaches via 4 screws. With our plug and play system you will not need to solder. Please note you will need a reef controller or potentiometer + 10V AC Adapter to run the dimmable driver.
4.25" x 9" Heatsink drilled/tapped for 12 LEDs and 4 installation holes
6 Solderless Cool White CREE XP-G LEDs
6 Solderless Royal Blue CREE XP-E LEDs
1 Mean Well ELN-60-48P dimmable driver or 1 Mean Well ELN-60-48D dimmable driver
2 Plug-n-Play 7 LED Terminal
1 Driver Jumper
1 Terminal Plug
1 Terminal to Terminal Jumper (8")
1 tube of Thermal Grease
1 x 60mm Vantec Stealth Fan
1 x 12V AC Adapter
2 water repellent wire nuts (plus 2 non-water repellent wire nuts)
1 power cord to attach to the drivers (US + Canada orders only)
7 feet of black bulk wire
7 feet of red bulk wire
1 zip tie
Screws (for the LEDs and to mount the heatsink to the hood
Click here for kit instructions
Click here for plug-and-play instructions
For orders outside the US, please email us first (additional shipping charges may apply)
If you'd like to change the color ratio please list under "special instructions" at the end of checkout the changes to be made (no additional charge, currently only cool white, neutral white and royal blue are available)

 

I forget the difference between ELN-60-48P and the ELN-60-48D dimmable drivers.

 

P=

• Perfect for running 5-8 XM-L LEDs
• 0 ~ 2.3A current range
• 13.5-27V DC Voltage (runs ~5-8 LEDs)
• PWM signal for dimming (optional)
• 100% full burn-in test
• 18 month warranty
• Fully programmable with PWM controllers (Arduino software, Reef Angel,etc)

D=

• Perfect for running 5-8 XM-L LEDs
• 0 ~ 2.3A current range
• 13.5-27V DC Voltage (runs ~5-8 LEDs)
• PWM signal for dimming (optional)
• 100% full burn-in test
• 18 month warranty
• Fully programmable with 0-10V controllers (Reef Keeper w/ ALC, Neptune Apex,etc) or a potentiometer + 10V AC adapter (If you have two or more drivers you can use our DIY 2 color dimming kit)

 

If you can only run 8 LEDs on a single driver, why doesn't the kit come with 2 drivers?

 

They are rating XM-L's not XP-E or G...We run 12 XP-E or G per "P or D"

 

Oh, sorry. I suppose I should read over better.

The XML's are the newer Cree diodes, aren't they?