Skimmer pump failing?

Discussion in 'Filters, Pumps, etc..' started by Mikro402, Feb 20, 2011.

to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.

  1. Mikro402

    Mikro402 Astrea Snail

    Joined:
    Jan 31, 2011
    Messages:
    38
    Location:
    Omaha,NE USA
    I have the AquaC Remora Pro hob skimmer. The pump is a Mag-Drive 3.
    Lately when I shut the pumps off to feed the fish the skimmer pump fails to come on. A few times it would delay a minute or two and then come on. The last time I had to take it out and tap it with a hammer to get it going.
    Could this be as simple as an impeller or do you think the whole pump is going.
     
    Mikro402, Feb 20, 2011
    Mikro402, Feb 20, 2011
    #1

    2. Click Here!

  2. Reeron

    Reeron Blue Ringed Angel

    Joined:
    Jun 18, 2008
    Messages:
    1,550
    Location:
    Kingston, NY
    You need to take the pump cover off and soak everything (pump included) in white distilled vinegar overnight. Mine did this too and just needed to have the deposits removed with a good soak and then a scrub with a toothbrush.
     
    Reeron, Feb 20, 2011
    Reeron, Feb 20, 2011
    #2
  3. Larz_1

    Larz_1 Bristle Worm

    Joined:
    Sep 29, 2009
    Messages:
    134
    Location:
    Amarillo, TX
    +1 to a vinegar soak.
     
    Larz_1, Feb 20, 2011
    Larz_1, Feb 20, 2011
    #3
  4. 2in10

    2in10 Super Moderator

    Joined:
    Aug 6, 2009
    Messages:
    19,258
    Location:
    Sparks, NV
    Definitely give the vinegar soak.
     
    2in10, Feb 20, 2011
    2in10, Feb 20, 2011
    #4
  5. Mikro402

    Mikro402 Astrea Snail

    Joined:
    Jan 31, 2011
    Messages:
    38
    Location:
    Omaha,NE USA
    I had it it apart back on Jan 15th.Cleaned it inside and out including the impeller.
    The pump is 5 years old..
     
    Mikro402, Feb 20, 2011
    Mikro402, Feb 20, 2011
    #5
  6. Mikro402

    Mikro402 Astrea Snail

    Joined:
    Jan 31, 2011
    Messages:
    38
    Location:
    Omaha,NE USA
    as it turned out it was a lose screw in the housing over the impeller.i had stripped it so i neede a larger screw(stainless).
     
    Mikro402, Mar 4, 2011
    Mikro402, Mar 4, 2011
    #6

    7. Click Here!

  7. ionlifeionizer

    ionlifeionizer Plankton

    Joined:
    Jan 13, 2011
    Messages:
    9
    I suggest disassemble the pump and soak it in pure vinegar for a day or so it could have calcium develop up that is making it to stick.
     
    ionlifeionizer, Mar 6, 2011
    ionlifeionizer, Mar 6, 2011
    #7