suggestions for cleaning glass

Discussion in 'General Reef Topics' started by mdbostwick, Mar 15, 2014.

to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.

  1. APC

    APC Gigas Clam

    Joined:
    May 23, 2005
    Messages:
    850
    Location:
    Atlanta, GA
    If its on the outside of the tank...maybe try CLR - Can you get that in Ohio? Its called CLR - Calcium Lime and Rust Remover - it is used for soap scum, and hard water stains - works wonders on shower doors. Its readily available here in GA - not sure if its available in OH though?
     
    1 person likes this.
  2. Click Here!

  3. mdbostwick

    mdbostwick Vlamingii Tang

    Joined:
    Feb 21, 2013
    Messages:
    1,899
    Location:
    Canton OH
    I concerned that the magic eraser took paint off your car and don't know if that would result in scratched glass. We do have clr I should have thought of that. I will try it in the morning. Wish me luck.
     
  4. mdbostwick

    mdbostwick Vlamingii Tang

    Joined:
    Feb 21, 2013
    Messages:
    1,899
    Location:
    Canton OH
    So, the CLR has somewhat worked. It is not so noticeable. still not sure about using the magic eraser. Anyone ever used that on glass before?
     
  5. Billme

    Billme Eyelash Blennie

    Joined:
    Sep 9, 2013
    Messages:
    1,287
    Location:
    Bakersfield, Ca
    Sounds to me like the glad may be chemically etched. If that's the case, only polishing will get it out. But polishing it deep enough to get to new glass may distort the area.
     
  6. mdbostwick

    mdbostwick Vlamingii Tang

    Joined:
    Feb 21, 2013
    Messages:
    1,899
    Location:
    Canton OH
  7. mdbostwick

    mdbostwick Vlamingii Tang

    Joined:
    Feb 21, 2013
    Messages:
    1,899
    Location:
    Canton OH
    so i have tried putting a vinegar soaked rag on the spots with no success. Thinking of trying this bleach solution. Any ideas on how much to mix?

    Also thought maybe a baking soda scrub of sorts might work? Anyone ever tried anything like this? or anyone think this is a bad idea? The last thing i want to do is damage.

    Any suggestions are appreciated.
     
  8. Click Here!

  9. Billme

    Billme Eyelash Blennie

    Joined:
    Sep 9, 2013
    Messages:
    1,287
    Location:
    Bakersfield, Ca
    If the glass is chemically etched, rubbing compound may work. The same stuff you use for car paint. It may take alot of rubbing.
     
  10. mdbostwick

    mdbostwick Vlamingii Tang

    Joined:
    Feb 21, 2013
    Messages:
    1,899
    Location:
    Canton OH
    Are you talking like wax? if not you will need to elaborate what i would need to get.
     
  11. Billme

    Billme Eyelash Blennie

    Joined:
    Sep 9, 2013
    Messages:
    1,287
    Location:
    Bakersfield, Ca
    Rubbing compound. Any auto part store will have it.
     
  12. mdbostwick

    mdbostwick Vlamingii Tang

    Joined:
    Feb 21, 2013
    Messages:
    1,899
    Location:
    Canton OH
    So i was concerned with scratching the glass by using a razor blade any harder than i had to begin with, so I got a new blade and carefully scraped some in a less conspicuous place and started to have success. So after 2 1/2 hours of tedious scraping, you cannot notice the marks from across the room any longer. I do believe it is etched a little because as i said 2 & 1/2 and it still has marks on it. The good news is, if you didn't know it was there before, you probably would never notice it now.

    I really appreciate everyone's help/recommendations. I did try all of them except the last one here about rubbing compound because by the time i saw the post, I had finished my aggressive razor scraping campaign. Thanks again!