Vortech MP 20 not starting up

i had to unplug my voortech for a few minutes plugged it back in, its not starting up and is now flashing red.

Any ideas, i have nothing from the motor, it tried to start up then just kind of died

 

There is a reset sequence you could maybe try, it's in the manual which is on the Ecotech website if you don't have the physical manual handy.

 

Yup, try resetting it. Your skimmer didn't leak on it did it? That would really suck.

 

ok im going to do a clean the vortech too, i wonder if that could be the problem

ok will do. Thankfully it didnt leak on it, it leaked on all of my cords and everything and left the floor and stand soaking wet, but thankfully the vortech remaind dry

 

cleaned the vortech, unpluged everything, got it to stop blinking green/red, went to a steady green, it wouldnt let me changed modes so i unplugged again, then it went to flashing white for a few seconds then it just like shut off, no color no flashing, nothing, and the propeller did not run during anything

 

Sounds like you may need to give Ecotech a call. They have really good customer service. Hope they can help you.

 

ok, i dont understand why its not working, it was working fine before i unplugged it, ive unplugged it a few times before no problem, im wondering if water did get on it, the shelf that it was on was yet, i guess from water bouncing off the carpet onto the stand, but the part of the shelf that the controller was on was dry along with the controller itself, but maybe some water got on it

 

hang on ill check my user manual

 

is it just blinking red ??? or another colour

 

because it should blink red and another colour according to this