water movement

Discussion in 'New To The Hobby' started by sparticus, Jan 20, 2009.

to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.

  1. sparticus

    sparticus Plankton

    Joined:
    Dec 20, 2008
    Messages:
    22
    Location:
    Oxford / UK
    there is lots of surface movement in my tank and i have added Koralia 4 due to its depth, there is not to much movement lower down do you think i might benefit if there is another Koralia 4 to circulate the water more ?
     

    Attached Files:

  2. Click Here!

  3. bc219

    bc219 Millepora

    Joined:
    Oct 21, 2008
    Messages:
    937
    Location:
    Mishawaka, IN
    A 4 might be a little much for your cube since you want it down low. I'd go with a 3 or maybe even a 2 so it's not blowing too much sand around.
     
  4. unclejed

    unclejed Whip-Lash Squid

    Joined:
    Sep 23, 2008
    Messages:
    2,964
    Location:
    Clinton Township, Michigan
    HI, from your pic it appears you have it 3/4 of the way down. The return is giving some surface agitation so I am not sure what you mean. After looking at your aqua scape again something hit me, do not put any Tubo snails or anything that will bring down your "house of Coral". Big Turbos and some other creatures will get up in there and can dislodge rock and Coral.
     
  5. coral reefer

    coral reefer Giant Squid

    Joined:
    Jan 9, 2006
    Messages:
    4,860
    Location:
    Wonderland
    You could wait to see what happens with your tank as inadequate flow will result in advection, diffusion, detritus accumulation in the benthic areas of your tank and also cyano or algae may grow in your substrate or on live rock.
     
  6. sparticus

    sparticus Plankton

    Joined:
    Dec 20, 2008
    Messages:
    22
    Location:
    Oxford / UK
    oki thanks for advise guys
     
  7. tigermike74

    tigermike74 Panda Puffer

    Joined:
    Sep 24, 2008
    Messages:
    2,116
    Location:
    Southern CA
    You can lower the Koralia and have it pointing slightly upward if you want more water movement down there without stiring up the sand. Just make sure it's not too close to the sand bed where it will get sucked into the impeller.