What do you use to clean your glass

Discussion in 'General Reef Topics' started by RemickJ, Oct 19, 2009.

to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.

  1. Rogues

    Rogues Spaghetti Worm

    Joined:
    Nov 1, 2009
    Messages:
    179
    Location:
    Springfield,IL
    im a noob and I have one though it seems fairly old (hand me down from last owner) it does work but I feel I still need a brush
     
  2. Click Here!

  3. ibefishy

    ibefishy Montipora Capricornis

    Joined:
    Jun 9, 2009
    Messages:
    1,021
    Location:
    Ca
    I use a mag-float with 1/2 of an algae pad on the inside and a very soft piece of terry cloth on the outside. I found if you cut an algae pad in 1/2 it will stick to the inside piece of the mag float. After cleaning the outside with ro/di water and a soft cloth I will use another small piece of terry cloth for the other side of the mag-float. I never let the mag-float touch the acrylic. I found this works great for acrylic if you are careful. You dont want to pick up and sand on the inside and you want to be sure there is no water drips that left salt on the outside.
     
  4. Peredhil

    Peredhil Giant Squid

    Joined:
    Aug 20, 2008
    Messages:
    5,176
    Location:
    Texas
    I don't want to get flamed over this (so don't) but I use these:

    [​IMG]

    I like them because there is no spray to overshoot... just wipe the glass and be done. I use the same sheet to then clean my mirrors, faucets, and the stainless steel appliances in the kitchen... So all that stays pretty clean.

    I've been using these for a few months now.