What order should i put the media inside my canister?

I'VE HAD THIS EHEIM FOR ABOUT 3 MONTHS ANDI HAVE BEEN CONFUSED ON HOW TO SET THE MEDIA UP. THE FIRST TIME I CLEANED IT I TOOK ALL THE BASKETS OUT AND RINSED EVERYTHING IN TANK WATER. BUT WHEN IT WAS TIME TO PUT IT ALL BACK IN.....I FORGOT THE ORDER. I DONT THINK IT MATTERS BUT THIS IS HOW IT'S SET UP.

IN THE 4TH BOTTOM TRAY I HAVE MY PHOSPHATE, NITRITE, NITRATE REMOVER
IN THE 3RD TRAY I HAVE MY AMMO CARB CHIPS
IN THE 2ND TRAY I HAVE MY CERAMIC RINGS
AND IN THE FIRST TRAY I HAVE THE COARSE FILTER PAD

ANY SUGGESTIONS ON THE SET UP I HAVE A CHEMICAL PAD THAT HAS FOUR OR FIVE DIFFERENT TYPES OF MEDIA SO IT DOES BIO, CHEM, AND MECH FILTRATION IN ONE PAD BUT I DONT KNOW WHAT TRAY TO PUT IT IN!:-[

 

all caps make my eyes hurt

 

3rd 2nd 4th 1st, in that order with what you have in them, thats how i have mine, but i also have filter sponges on the bottom...and carbon directly beneath my phos remover.

 

well filter pad goes on top.
then comes biomedia(ceramic rings)

you don't need to use ammonia and nitrite remover your bacteria on the biomedia should do this.
you can probably replace those with just carbon.

or you can add a finer filter pad under the coarser one

 

thanks! i will use that coarse pad on top and then the finer one then ceramic rings, then carbon?
thanks alot guys, im so glad i found this site everyone is really a big help!